NefMoto > Technical > Flashing and Chipping > Galletto read error - changine speed error
Pages: [1]
« previous next »
Author Topic: Galletto read error - changine speed error  (Read 6800 times)
Waspjr
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 64
« on: October 19, 2013, 12:50:23 PM »
Hello all i am fairly new here and i am trying to gather all the info i can on ecu related topics i purchased galletto it installed fine and i got the drivers installed i am running win 7 32 bit and i get a changing speed error when i try and read my ecu. I have tried it on my other laptop it is running vista and i cant get it to recognize the driver files that came with the dongle. If any one can shed some light on this it would be greatly appreciated.
I am running a a4 1.8t 2005 fwd cvt
Thanks again
Logged
gigabyte
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 70
« Reply #1 on: October 19, 2013, 01:09:49 PM »
As it says changing speed have you tried reading at a different speed? Hopefully someone with a Galletto can get some answers for you. Also have you tried running the program as an Administrator? Doubt that's the problem but you never know  Undecided
Do you have any other cables i.e MPPS or a cable you can use with Nefmoto?
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #2 on: October 19, 2013, 01:28:02 PM »
theres no need to click ecu data. just click the read button.
and yay! clone tools.
Logged
Waspjr
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 64
« Reply #3 on: October 20, 2013, 03:24:25 PM »
Thanks for the replies Smiley i have tried to just read ecu and also ecu data i have also tried both ecu options for my car. But as gigabite had said i do have a ross tech cable that i am going to try with the nef software if i am correct i just have to put the cable into dumb mode i will try this tonight.
Thanks again
Cheers
Logged
Waspjr
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 64
« Reply #4 on: October 21, 2013, 08:13:04 PM »
well I managed to get it figured out I used my rosstech cable in dumb mode at 38400 baud 29f800bb and it worked I pulled my first bin Smiley it wouldn't work at any other setting I just did trial and error
thanks
Logged
gigabyte
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 70
« Reply #5 on: October 22, 2013, 03:43:39 AM »
Glad you got it sorted  Smiley
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 17, 2024, 03:04:17 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)