Pages: [1]
Author Topic: MPPS clone on golf5 gti med9.1  (Read 9258 times)
majorahole
Sr. Member
****

Karma: +16/-4
Offline Offline

Posts: 302


« on: March 23, 2011, 02:50:43 PM »

i am thinking about getting this to flash my gti with, but i want to make sure of a few things first.
1. it will work
2. it can do checksums
3. i dont need anything else (IMMO tool, ect)

i was going to go with a bdm, but i dont want to open my ecu becasue i still have 6 years of warranty. i figure if this works, i can just flash back my stock ori when i go to the dealer.

the place i want to get it from says it can read and write over can, so i would hope that it can.
it also says it can do checksum calculations.

thanks for any input.

Logged
nitroCZ
Newbie
*

Karma: +3/-0
Offline Offline

Posts: 4


« Reply #1 on: March 23, 2011, 02:54:27 PM »

this unit have flash counters,i dont know if mpps clone can change this counter,otherwise waranty endddd...
Logged
majorahole
Sr. Member
****

Karma: +16/-4
Offline Offline

Posts: 302


« Reply #2 on: March 23, 2011, 03:00:56 PM »

can any other tool change that?? i wonder how apr and giac do it??
Logged
thom337
Full Member
***

Karma: +15/-1
Offline Offline

Posts: 81


« Reply #3 on: March 23, 2011, 03:30:33 PM »

You may have issues flashing it in the vehicle through the OBD port, I think it must first pass through the CAN-gateway in the cluster... you could always hook straight to drivetrain CAN bus and do it though.  Also, I could be wrong but I don't believe MPPS clone will correct MED9.1 checksums
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.026 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)