Bench set up and Immo defeat 06A 906 032 HN

Pages: [1]

« previous next »

Author

Topic: Bench set up and Immo defeat 06A 906 032 HN (Read 15002 times)

onsperformance

Newbie

Karma: +6/-0
Offline

Offline

Posts: 13

	Bench set up and Immo defeat 06A 906 032 HN « on: November 05, 2013, 08:06:33 AM »

Hi I have made a bench set-up
http://i1001.photobucket.com/albums/af140/argdub/BenchCable.gif
http://i1001.photobucket.com/albums/af140/argdub/bootpin142.jpg

I have also Grounded Pin 24 to put the ECU into Boot Mode
I am also using the KKL Cable

I opened up CMD and typed the following
C:\Usesrs\Steven\Downloads\me7_95040.exe

Followed by:
C:\Usesrs\Steven\Downloads\me7_95040 -r -p 3 95040.bin

Com 3 ok
boot mode ... failed
closing Com 3

No matter what I try I can not get the ECU to fire up in boot mode.
Any help would be good!
Thanks,
Steven


	Logged

oldcarguy85

Full Member

Karma: +15/-1
Offline

Offline

Posts: 247

	Re: Bench set up and Immo defeat 06A 906 032 HN « Reply #1 on: November 05, 2013, 09:01:14 AM »

What procedure are you following to put ECU in boot mode? It sghould be....

1. ecu power off
2. ground pin 24
3. power on ecu.
4. wait 2-3 seconds.
5. remove pin 24 ground
6. try to connect


	Logged

onsperformance

Newbie

Karma: +6/-0
Offline

Offline

Posts: 13

	Re: Bench set up and Immo defeat 06A 906 032 HN « Reply #2 on: November 23, 2013, 05:18:09 AM »

Okay I have tried 3 seconds even up to 10 seconds still now joy!
My lupo is all done just run's for a second then cut's out really need to get this done so I can drive it.


	Logged

onsperformance

Newbie

Karma: +6/-0
Offline

Offline

Posts: 13

	Re: Bench set up and Immo defeat 06A 906 032 HN « Reply #3 on: November 23, 2013, 05:39:16 AM »

Update:
Com Port:3
Bud Rate: 10400
Opening Com 3 ... OK
Initiating communication ... FAIL
Closing COM 3

Any Ideas

Also I am now doing this over OBD


	Logged

oldcarguy85

Full Member

Karma: +15/-1
Offline

Offline

Posts: 247

	Re: Bench set up and Immo defeat 06A 906 032 HN « Reply #4 on: November 23, 2013, 06:01:40 AM »

What do you mean you are doing it over obd? Do you mean you are doing it in the car?


	Logged

f1torrents

Sr. Member

Karma: +17/-1
Offline

Offline

Posts: 303

	Re: Bench set up and Immo defeat 06A 906 032 HN « Reply #5 on: November 23, 2013, 07:09:43 AM »

C:\Users\Steven\Downloads\me7_95040 --bootmode 95040 -rp3 95040.bin

This is what your command should look like.
You may have to play with the baud rate if its not connecting properly.

Edit...
I think you are using V1.3?
If you are get V1.4...


« Last Edit: November 23, 2013, 07:59:53 AM by f1torrents »	Logged

onsperformance

Newbie

Karma: +6/-0
Offline

Offline

Posts: 13

	Re: Bench set up and Immo defeat 06A 906 032 HN « Reply #6 on: November 24, 2013, 04:34:45 PM »

Quote from: f1torrents on November 23, 2013, 07:09:43 AM

Yes i am using 1.3 just downloading 1.4 and I have sent you a PM.


	Logged

onsperformance

Newbie

Karma: +6/-0
Offline

Offline

Posts: 13

	Re: Bench set up and Immo defeat 06A 906 032 HN « Reply #7 on: November 25, 2013, 10:02:30 AM »

Now i am getting this? using Version 1.4


	Logged

TheDSI

Full Member

Karma: +12/-0
Offline

Offline

Posts: 78

	Re: Bench set up and Immo defeat 06A 906 032 HN « Reply #8 on: November 25, 2013, 02:52:43 PM »

you realy need boot mode .
it's a lot faster and stable .


	Logged

onsperformance

Newbie

Karma: +6/-0
Offline

Offline

Posts: 13

	Re: Bench set up and Immo defeat 06A 906 032 HN « Reply #9 on: November 25, 2013, 04:26:54 PM »

Quote from: TheDSI on November 25, 2013, 02:52:43 PM

you realy need boot mode .
it's a lot faster and stable .

Ok using what Version?


	Logged

ddillenger

Moderator
Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Bench set up and Immo defeat 06A 906 032 HN « Reply #10 on: November 25, 2013, 04:38:21 PM »

I run 1.3, find it to be the least buggy.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

TheDSI

Full Member

Karma: +12/-0
Offline

Offline

Posts: 78

	Re: Bench set up and Immo defeat 06A 906 032 HN « Reply #11 on: November 26, 2013, 02:46:58 AM »

used V1.31 yesturday on a 8L0906018K 512k ME7 .
OBD read didn't work . it stop after a minute of reading with an error .
bootmode read take about 5s and write about 15s
I will test on a 8N0906018J 1M ME7


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 04:58:25 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search