Can't get a tuned RS6+ ecu into bootmode

Pages: [1]

« previous next »

Author

Topic: Can't get a tuned RS6+ ecu into bootmode (Read 4821 times)

Captainiglo

Newbie

Karma: +1/-0
Offline

Offline

Posts: 15

	Can't get a tuned RS6+ ecu into bootmode « on: November 12, 2013, 12:46:20 PM »

Hi,

I've got a RS6+ plus ME7.1.1 ECU 4D0907558F with a tuned 4D1907558 0261207857 1037366304 0002 file on it, and would like to go back to stock.
With Galletto and the ME7_95040 (and my bench harness) I've successfully gone into bootmode on RS4 S4 and A3 ECU's, but can't connect with either tool to the RS6 ECU.

What else can I try to read/write the file on there?


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Can't get a tuned RS6+ ecu into bootmode « Reply #1 on: November 12, 2013, 03:45:24 PM »

Bootmoding the newer ME7.1.1's is a little trickier. You need to add a resistor, or desolder a resistor. There's a thread on it here, but the name escapes me.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

black

Full Member

Karma: +0/-0
Offline

Offline

Posts: 80

	Re: Can't get a tuned RS6+ ecu into bootmode « Reply #2 on: November 12, 2013, 09:19:24 PM »

Quote from: ddillenger on November 12, 2013, 03:45:24 PM

Bootmoding the newer ME7.1.1's is a little trickier. You need to add a resistor, or desolder a resistor. There's a thread on it here, but the name escapes me.

I never needed a resistor to get RS6 ecus in bootmode... just the same way as RS4


	Logged

Captainiglo

Newbie

Karma: +1/-0
Offline

Offline

Posts: 15

	Re: Can't get a tuned RS6+ ecu into bootmode « Reply #3 on: November 13, 2013, 01:45:39 PM »

My Galletto software was sh*t (orange light flashing every 2 seconds on the OBD plug).

With the proper English Galletto on here, I read the file in regular mode in 10 minutes and wrote back the original in bootmode in 2,5 minutes. Writing back in regularmode gave me a connection speed error.

Thanks!


« Last Edit: November 17, 2013, 05:45:18 AM by Captainiglo »	Logged

Captainiglo

Newbie

Karma: +1/-0
Offline

Offline

Posts: 15

	Re: Can't get a tuned RS6+ ecu into bootmode « Reply #4 on: November 29, 2013, 01:23:50 PM »

Update:

I get into bootmode 100% of the time when I short pin 24 before giving the ECU any power.

Update:
I've got a ignition switch in my bench setup, but don't need to turn it on to get into bootmode.
In with the RS4 ECU I shorted the bootpin before switching on the ignition on my bench harness (already with the powersuply on).


« Last Edit: December 05, 2013, 01:34:02 PM by Captainiglo »	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 28, 2024, 08:35:47 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search