rrdiagnostic
Newbie
Karma: +0/-0
 Offline
Posts: 13
|
 |
« on: November 14, 2013, 12:50:51 PM »
|
|
|
Hey guys... i'm new in chipping... i want to flash my me7 and have a galletto 2. I can't read it in boot mode... is anyone here who is using galletto 2 in boot mode?? Can anyone tell me which cable (color) i have to use for k-line?  ? |
|
|
|
|
Logged
|
|
|
|
n0ble
Full Member
Karma: +2/-0
Offline
Posts: 192
|
|
« Reply #1 on: November 14, 2013, 05:33:06 PM »
|
|
|
I thought kline was green?
|
|
|
|
|
Logged
|
|
|
|
rrdiagnostic
Newbie
Karma: +0/-0
Offline
Posts: 13
|
|
« Reply #2 on: November 15, 2013, 12:14:00 PM »
|
|
|
You thougt or you know it??  |
|
|
|
|
Logged
|
|
|
|
n0ble
Full Member
Karma: +2/-0
Offline
Posts: 192
|
|
« Reply #3 on: November 15, 2013, 02:19:46 PM »
|
|
|
You thougt or you know it?? Dude Google is your friend and yes K-line is green. |
|
|
|
|
Logged
|
|
|
|
rrdiagnostic
Newbie
Karma: +0/-0
Offline
Posts: 13
|
|
« Reply #4 on: November 17, 2013, 02:07:15 AM »
|
|
|
Thanks... i will try it so...  |
|
|
|
|
Logged
|
|
|
|
rrdiagnostic
Newbie
Karma: +0/-0
Offline
Posts: 13
|
|
« Reply #5 on: November 17, 2013, 02:15:56 AM »
|
|
|
I didn't found anything at google about this... and in the cableplan from fg tech is ignition the green one... Do i have contact the boot pin before voltage on or after |
|
|
|
|
Logged
|
|
|
|
n0ble
Full Member
Karma: +2/-0
Offline
Posts: 192
|
|
« Reply #6 on: November 17, 2013, 01:51:32 PM »
|
|
|
I didn't found anything at google about this... and in the cableplan from fg tech is ignition the green one... Do i have contact the boot pin before voltage on or after Yes it can also be used for ignition. But do not wire to ignition pin, wire it to k-line pin. Connect the boot pin to ground before voltage then remove from ground after around 10 seconds |
|
|
|
|
Logged
|
|
|
|
n0ble
Full Member
Karma: +2/-0
Offline
Posts: 192
|
|
« Reply #7 on: November 18, 2013, 10:53:25 PM »
|
|
|
What is the actual version of the ECU?
ME7.1, 7.5 or 7.7?
|
|
|
|
|
Logged
|
|
|
|
rrdiagnostic
Newbie
Karma: +0/-0
Offline
Posts: 13
|
|
« Reply #8 on: November 19, 2013, 04:02:35 AM »
|
|
|
Its a me7.1
AM29F800BB
|
|
|
|
|
Logged
|
|
|
|
n0ble
Full Member
Karma: +2/-0
Offline
Posts: 192
|
|
« Reply #9 on: November 19, 2013, 04:50:55 AM »
|
|
|
Its a me7.1
AM29F800BB
Ok then yes carry on with that process. |
|
|
|
|
Logged
|
|
|
|
rrdiagnostic
Newbie
Karma: +0/-0
Offline
Posts: 13
|
|
« Reply #10 on: November 19, 2013, 09:36:08 AM »
|
|
|
Yes it can also be used for ignition. But do not wire to ignition pin, wire it to k-line pin.
Connect the boot pin to ground before voltage then remove from ground after around 10 seconds
Ok... only for understanding... I connect the boot pin for 10 seconds to ground, remove it and then voltage to read or write... |
|
|
|
|
Logged
|
|
|
|
oldcarguy85
Full Member
Karma: +15/-1
Offline
Posts: 247
|
|
« Reply #11 on: November 19, 2013, 09:45:59 AM »
|
|
|
Ok... only for understanding... I connect the boot pin for 10 seconds to ground, remove it and then voltage to read or write... 1. ground boot pin 2. apply power 3. remove ground from boot pin after 3 seconds |
|
|
|
|
Logged
|
|
|
|
rrdiagnostic
Newbie
Karma: +0/-0
Offline
Posts: 13
|
|
« Reply #12 on: November 19, 2013, 11:05:05 AM »
|
|
|
Ok... thx you guys... i'll try it at weekend and report...
|
|
|
|
|
Logged
|
|
|
|
n0ble
Full Member
Karma: +2/-0
Offline
Posts: 192
|
|
« Reply #13 on: November 19, 2013, 12:53:04 PM »
|
|
|
Ok... thx you guys... i'll try it at weekend and report...
No problem, ensure that you only use 1 green wire to k-line. Do not put a second green wire to ignition as it's not required |
|
|
|
|
Logged
|
|
|
|
n0ble
Full Member
Karma: +2/-0
Offline
Posts: 192
|
|
« Reply #14 on: December 05, 2013, 03:22:45 PM »
|
|
|
So did you ever get this working?
|
|
|
|
|
Logged
|
|
|
|
|
