Pages: [1]
Author Topic: Ford Focus ST 2.5T ME9  (Read 4001 times)
n0ble
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 192


« on: November 24, 2013, 04:43:34 PM »

Hi,

Has anyone ever flashed one of these cars?

If so how did you do it and is the BDM port definitely like the standard Bosch BDM or is it different?
Logged
P.A.T.
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 15


« Reply #1 on: December 14, 2013, 12:54:35 PM »

Hi,

Has anyone ever flashed one of these cars?

If so how did you do it and is the BDM port definitely like the standard Bosch BDM or is it different?

Hi.

I flashed many of these cars.
I used the OBD port. I use my Byteshooter and CMD to read and write the files.
For BDM, the the BDM ports work perfectly well with the Bosch adaptor.
Logged
n0ble
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 192


« Reply #2 on: December 15, 2013, 01:59:45 AM »

Hi.

I flashed many of these cars.
I used the OBD port. I use my Byteshooter and CMD to read and write the files.
For BDM, the the BDM ports work perfectly well with the Bosch adaptor.

Thank-You.

I ended up bench flashing the ECU.

There are BDM ports on the top but they are much like Siemens style and also BDM ports on the bottom but the casing is hard to get off the bottom.
The bottom ports are as you say standard Bosch style.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 16 queries. (Pretty URLs adds 0s, 0q)