immo off 95040 request and help to learn how to

Pages: [1]

« previous next »

Author

Topic: immo off 95040 request and help to learn how to (Read 8836 times)

jogtx16v

Full Member

Karma: +6/-1
Offline

Offline

Posts: 139

	immo off 95040 request and help to learn how to « on: January 07, 2014, 05:58:27 PM »

Hello

I have in attachement 95040 . came from my 032CL

need help to immo off

the chip is ST9948 / 950403

Thank you. and I need to learn how to immo off myself. I have HxD hexa editor. need more ?

If anybody can help my here or in pm it will be very apreciated Wink

Uploaded with ImageShack.us


	Logged

IamwhoIam

Hero Member

Karma: +52/-115
Offline

Offline

Posts: 1070

	Re: immo off 95040 request and help to learn how to « Reply #1 on: January 07, 2014, 07:25:01 PM »

It's all been covered dozens of times on here, how about using the "search" function?


	Logged

I have no logs because I have a boost gauge (makes things easier)

darkshado87

Guest

	Re: immo off 95040 request and help to learn how to « Reply #2 on: January 07, 2014, 07:35:00 PM »

immo offed. there is a kp. file for winOLS for immo off or use your hex editor to compare


« Last Edit: January 07, 2014, 07:40:16 PM by darkshado87 »	Logged

jogtx16v

Full Member

Karma: +6/-1
Offline

Offline

Posts: 139

	Re: immo off 95040 request and help to learn how to « Reply #3 on: January 07, 2014, 07:41:59 PM »

Quote from: IamwhoIam on January 07, 2014, 07:25:01 PM

It's all been covered dozens of times on here, how about using the "search" function?

I search a lot with ''search'' function but dosen't find. maybe im using the wrong word. not sure


	Logged

jogtx16v

Full Member

Karma: +6/-1
Offline

Offline

Posts: 139

	Re: immo off 95040 request and help to learn how to « Reply #4 on: January 09, 2014, 09:08:00 AM »

thank you very much darkshado87 !

after some research I found how to immo off 95040 file.

Can I just change extension .ols to .bin ? or It required winols and save as .bin ?

And for futur immo off, can I do just editing the 4 bytes with hexa editor instead to use winols ?


	Logged

jogtx16v

Full Member

Karma: +6/-1
Offline

Offline

Posts: 139

	Re: immo off 95040 request and help to learn how to « Reply #5 on: January 09, 2014, 03:23:47 PM »

Quote from: jogtx16v on January 09, 2014, 09:08:00 AM

Can I just change extension .ols to .bin ? or It required winols and save as .bin ?

And for futur immo off, can I do just editing the 4 bytes with hexa editor instead to use winols ?

someone can confirm if im ok ?


	Logged

ddillenger

Moderator
Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: immo off 95040 request and help to learn how to « Reply #6 on: January 09, 2014, 04:15:54 PM »

No, you can't change an OLS to bin, but shadows file isn't an OLS. Just rename his file .bin and it'll be fine.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

jogtx16v

Full Member

Karma: +6/-1
Offline

Offline

Posts: 139

	Re: immo off 95040 request and help to learn how to « Reply #7 on: January 09, 2014, 07:55:34 PM »

thank you very much ddillenger Wink


	Logged

jogtx16v

Full Member

Karma: +6/-1
Offline

Offline

Posts: 139

	Re: immo off 95040 request and help to learn how to « Reply #8 on: January 10, 2014, 12:36:42 PM »

This is possible to clear all DTC after bench setup ecu's ??

many dtc's such as :

16622 - Manifold Pressure / Boost Sensor (G31): Signal too High
P0238 - 35-00 - -
18058 - Powertrain Data Bus: Missing Message from Instrument Cluster
P1650 - 35-00 - -
17925 - Main Relay (J271): Electrical Malfunction
P1517 - 35-00 - -

and some other...

I have tried clear with vcds in the bench but no sensor at all , all code recur.


« Last Edit: January 10, 2014, 12:40:22 PM by jogtx16v »	Logged

ddillenger

Moderator
Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: immo off 95040 request and help to learn how to « Reply #9 on: January 10, 2014, 02:42:31 PM »

of course those codes recur, the ecu isn't in the car. You can never clear ALL codes on the bench. Those will disappear as soon as you install it.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 29, 2024, 03:46:26 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search