Pages: [1]
Author Topic: Maybe new ecu...mbox car-ecu to abox question  (Read 5520 times)
ventovr6qc
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 14


« on: April 20, 2011, 07:53:13 PM »

is it possible to flash a mbox .bin to a abox ecu
if yes does, will i work on my 2001.5 hitachi MAF car

thanks
Logged
julex
Hero Member
*****

Karma: +79/-4
Offline Offline

Posts: 923


« Reply #1 on: April 20, 2011, 08:03:56 PM »

is it possible to flash a mbox .bin to a abox ecu
if yes does, will i work on my 2001.5 hitachi MAF car

thanks

yes and it will. I have m-box bin running on my Allroad so talk about moving bins around Smiley
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #2 on: April 20, 2011, 08:05:32 PM »

is it possible to flash a mbox .bin to a abox ecu
if yes does, will i work on my 2001.5 hitachi MAF car


Yes (assuming your 2001.5 was last running an m-box)

If not, you may have to do a cluster recode.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
EuroXs4
Full Member
***

Karma: +15/-31
Offline Offline

Posts: 209


« Reply #3 on: April 24, 2011, 04:35:12 PM »

I thought mafs were different between those 2 ecus??IIRC Abox uses a Bosch maf and the Mbox uses a hitachi maf no???
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #4 on: April 25, 2011, 09:18:12 AM »

I thought mafs were different between those 2 ecus??IIRC Abox uses a Bosch maf and the Mbox uses a hitachi maf no???

Yes, but you can flash M-box (hitachi) code onto an A-box ECU and it will work fine with a hitachi maf car...
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)