NefMoto > General > General Discussion > Differnce between 551K and 551F box RS4 B5
Pages: [1]
« previous next »
Author Topic: Differnce between 551K and 551F box RS4 B5  (Read 6956 times)
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556
« on: February 04, 2014, 07:02:15 AM »
What is the difference between those two and can both be used in the same car?
Can I take a 551F box and flash in 551K file?
What would happen here?
I am trying to learn, thanx!!
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #1 on: February 04, 2014, 07:51:36 AM »
You can, and you should, as 551k has misfire monitoring.
But not over OBD.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556
« Reply #2 on: February 04, 2014, 09:31:27 AM »
Ok, thanx D.
What is the procedure than?
A friend has an RS with oem K box, that was gone bad.
He bought a used one, but it was an F, hence the question Smiley
Logged
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556
« Reply #3 on: February 07, 2014, 09:03:34 AM »
Quote from: Mocke on February 04, 2014, 09:31:27 AM
Ok, thanx D.
What is the procedure than?
A friend has an RS with oem K box, that was gone bad.
He bought a used one, but it was an F, hence the question Smiley



Anybody??
Logged
armageddon
Sr. Member
****

Karma: +20/-3
Offline Offline

Posts: 348
« Reply #4 on: February 09, 2014, 08:29:19 AM »
from what I had read over here you have to flash K-box file in boot mode, only then you could flash over OBD
Logged
gregsback
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 50
« Reply #5 on: February 09, 2014, 10:26:10 AM »
You can use the F on a K box, but  I cannot recommend to do so. If you do so, you also have to correct the variant coding (in your bin) as this does not match from F on K (but vice versa). Otherwise you will get an error of wrong ECU coding.
Why don't you use the K Box?
Logged
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556
« Reply #6 on: February 09, 2014, 12:18:15 PM »
Quote from: gregsback on February 09, 2014, 10:26:10 AM
You can use the F on a K box, but  I cannot recommend to do so. If you do so, you also have to correct the variant coding (in your bin) as this does not match from F on K (but vice versa). Otherwise you will get an error of wrong ECU coding.
Why don't you use the K Box?



Hi

It is a friend of mine. He had a problem with rear O2-s. We have emission laws over here that do not allow dtc on these. He swapped them for new - Did not help. He swapped the entire harness - Nada. So he bought a used 551F box, but he missed that his oem is 551K.

"correct the variant coding (in your bin)" that means?
Is it the same procedure K = F?
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #7 on: February 09, 2014, 03:02:48 PM »
Contact me and I can fix the situation for you ...
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556
« Reply #8 on: February 12, 2014, 10:28:49 AM »
Quote from: prj on February 09, 2014, 03:02:48 PM
Contact me and I can fix the situation for you ...

In the end you just might do that, but i would like to learn something btw.
I would like to know how it is done, plz.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 01:02:55 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 18 queries. (Pretty URLs adds 0s, 0q)