NefMoto > Technical > Flashing and Chipping > ECU Pin Diagram for audi B5 1996 1.9 tdi.. 028 906 021 CE
Pages: [1]
« previous next »
Author Topic: ECU Pin Diagram for audi B5 1996 1.9 tdi.. 028 906 021 CE  (Read 7099 times)
Cika
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11
« on: February 17, 2014, 03:06:59 AM »
I want to remap this ecu... and with galleto 1260..gets error while readnig ecu data VIA diagnostic port.. and i was reading on some forums..that i need to remap it on the table..

I need pins ( K line , ground , Positive (B+))

If i am missing something correct me. Cheesy
Logged
terok
Full Member
***

Karma: +8/-3
Offline Offline

Posts: 134
« Reply #1 on: February 17, 2014, 04:46:20 AM »
Cannot be done via OBD. 2x OTP ROMs inside, you need new chips to program.
Logged
Cika
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11
« Reply #2 on: February 17, 2014, 11:08:02 AM »
Quote from: terok on February 17, 2014, 04:46:20 AM
Cannot be done via OBD. 2x OTP ROMs inside, you need new chips to program.
where can i find new EEPROM's Huh to fit this ecu ??
Logged
_mumin_
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 46
« Reply #3 on: February 17, 2014, 10:23:05 PM »
Look for 29f010 PLCC32 this are programmable flash chips.
Logged
Cika
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11
« Reply #4 on: February 18, 2014, 12:32:34 AM »
Quote from: _mumin_ on February 17, 2014, 10:23:05 PM
Look for 29f010 PLCC32 this are programmable flash chips.
Thanks... but how am i going to program them... via the obd port.. or on the table... with the three pins.. k line ground B+  Huh



http://www.aliexpress.com/item/IC-new-original-AM29F010B-70JC-AM29F010B-AM29F010-29F010-PLCC32/1559152424.html  Are these ok ??
« Last Edit: February 18, 2014, 12:34:36 AM by Cika » Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #5 on: February 18, 2014, 12:42:15 AM »
You cannot write that ecu. You must buy new eeproms and program them in a chip writer. I use a GQ4X.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Cika
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11
« Reply #6 on: February 18, 2014, 12:54:43 AM »
Quote from: ddillenger on February 18, 2014, 12:42:15 AM
You cannot write that ecu. You must buy new eeproms and program them in a chip writer. I use a GQ4X.
OK thx for the info... is there a cheaper.. Chip writer ... and are those chips on aliexpress  ok (for programing and that will work with the ecu) Huh
Logged
_mumin_
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 46
« Reply #7 on: February 18, 2014, 01:14:08 AM »
Yes those chips are ok. You want cheaper than GQ4X ? It's 100$ come on.
Logged
Cika
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11
« Reply #8 on: February 18, 2014, 07:40:28 AM »
Quote from: _mumin_ on February 18, 2014, 01:14:08 AM
Yes those chips are ok. You want cheaper than GQ4X ? It's 100$ come on.
I dont have a store...where i can buy it... i need to order it from the internet...
can you type more chip writers... (i will search them on aliexpress...and order..one)

(can it be done with BDM 100 Huh )
or this one
http://www.aliexpress.com/item/Best-price-xprogm-ecu-programmer-full-authorization-XPROG-m-V5-0-XPROG-M-programmer-with-multi/694501276.html
« Last Edit: February 18, 2014, 07:54:30 AM by Cika » Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 28, 2024, 07:45:00 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)