Pages: 1 [2]
Author Topic: What MAPs are these?  (Read 14257 times)
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825


« Reply #15 on: March 04, 2014, 02:07:18 PM »

$07554 in all damos I saw...
I ever saw 256 "continuous" points in M3.8.3 MLHFM map

Again thanks for you help.
Logged
grey
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 146


« Reply #16 on: October 04, 2014, 12:56:32 PM »

May i ask a question  Smiley

What are this maps?What does it do?

KFWDYN.0
KFWDYN.1
KFWDYN.2

Logged
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825


« Reply #17 on: October 06, 2014, 07:40:06 AM »

May i ask a question  Smiley
What are this maps?What does it do?
KFWDYN.0
KFWDYN.1
KFWDYN.2

I have interpret it as:

KFWDYN - Zündwinkel Dynamikvorhalt bei BA
KFWDYN  = Firing angle dynamic lead in BA (Acceleration Enrichment) / Ignition Firing Dynamic Angle for Acceleration Enrichment / Ignition Dynamic Map for Acc Enrich
X / Y / Z = Throttle Angle [°degrees] / RPM / Crank Angle BTDC [ºDegrees]
Pre-calculation ignition firing angle for acceleration (TB pedal ) per RPM values.
Logged
grey
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 146


« Reply #18 on: October 06, 2014, 08:56:19 AM »

I have interpret it as:

KFWDYN - Zündwinkel Dynamikvorhalt bei BA
KFWDYN  = Firing angle dynamic lead in BA (Acceleration Enrichment) / Ignition Firing Dynamic Angle for Acceleration Enrichment / Ignition Dynamic Map for Acc Enrich
X / Y / Z = Throttle Angle [°degrees] / RPM / Crank Angle BTDC [ºDegrees]
Pre-calculation ignition firing angle for acceleration (TB pedal ) per RPM values.


Thanks Elio
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)