Pages: 1 [2]
Author Topic: Med9 turbo pressure control  (Read 12598 times)
RaraK
Hero Member
*****

Karma: +58/-2
Offline Offline

Posts: 539


« Reply #15 on: March 05, 2014, 01:02:37 PM »

You just seem to want to take this turbo out of its efficiency range.

go ahead and crank the wastegate or get a forge unit, you will hold 1.4 to redline i bet at that point.

now go log your iat's after a few wot runs.

Logged
Rick
Hero Member
*****

Karma: +63/-4
Offline Offline

Posts: 704


« Reply #16 on: March 06, 2014, 05:31:01 AM »

This is  about as much as you will get on K04.  And look how the temps are rising quickly, and this is with a much bigger inter cooler than std.

Rick
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.011 seconds with 17 queries. (Pretty URLs adds 0s, 0q)