Pages: [1]
Author Topic: Read Chipped 8N0 906 018 BH  (Read 4235 times)
Topspeedwolf
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« on: March 10, 2014, 02:22:33 PM »

I have a Chipped ECU on my table, I opened it, and this is what I see. It does not look normal.

Can I Read/Write it normal with NefMoto Software and Galletto 1260
without problems in Boot Mode ?


Sorry for my bad english  Undecided
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #1 on: March 10, 2014, 02:28:44 PM »

Looks like MTM. You cannot flash over it, but you can read it.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Topspeedwolf
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #2 on: March 10, 2014, 02:49:56 PM »

So it's only intended that the dealer can't overwrite it?

I can use the normal Boot Mode Pins ?

Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #3 on: March 10, 2014, 03:10:25 PM »

You cannot overwrite it, even in bootmode! It has an encryption board! You must replace it with a stock chip. If you are in the US I can do that for you.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Topspeedwolf
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #4 on: March 10, 2014, 03:22:24 PM »

Yes I understood, thank-you ! I want to read it first and Save, and then replace it with a Stock Chip, I'm from Europe but thanks for the offer.   
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)