Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Tuning
>
Meth and Tuning
Pages:
1
2
[
3
]
« previous
next »
Author
Topic: Meth and Tuning (Read 37921 times)
Awaken
Full Member
Karma: +3/-3
Offline
Posts: 84
Re: Meth and Tuning
« Reply #30 on: November 16, 2019, 06:54:19 AM »
With little hopes to anyone replying after so many years, but let's try:
I'd like to run "mild" water/meth injection, just for safety. I am happy with power output on gasoline, I am not happy with EGT (~ 1000C) and I just want to lower it all together under high boost and high rpm.
My car has wideband and lambda control at WOT. If it detects rich, wouldn't it simply cut down fuel trying to meet target lambda automatically? Why would it be needed to change maps for less fuel to compensate for water/meth?
Logged
BlackT
Hero Member
Karma: +79/-40
Offline
Posts: 1425
Re: Meth and Tuning
« Reply #31 on: November 16, 2019, 09:36:05 AM »
Beacuse at lambda 0.9 you need 6:1 AFR for methanol
So the ECU will try to reach 0.9 lambda but for that you need twice more injected methanol
Look at table, don't forget ecu measure lambda
Logged
Awaken
Full Member
Karma: +3/-3
Offline
Posts: 84
Re: Meth and Tuning
« Reply #32 on: November 16, 2019, 11:02:19 AM »
Makes sense, thank you!
Logged
fluke9
Full Member
Karma: +26/-1
Offline
Posts: 113
Re: Meth and Tuning
« Reply #33 on: November 17, 2019, 03:27:19 PM »
Quote from: BlackT on November 16, 2019, 09:36:05 AM
Beacuse at lambda 0.9 you need 6:1 AFR for methanol
If you run pure methanol...
Adding a bit of methanol on top of gas should be a completly different story.
Logged
Awaken
Full Member
Karma: +3/-3
Offline
Posts: 84
Re: Meth and Tuning
« Reply #34 on: December 23, 2019, 12:41:45 PM »
Essentially this is what I am intending, just to keep EGT below or around 900C tops. My EGT gauge is actually a PID controller with a built in relay and I intend to wire the pump for meth to that and only spray as long as I am over 880C for example. By default the meth is boost controlled, which I don't need. I don't think I will make any changes to the fuel maps with the intended setup.
Logged
Pages:
1
2
[
3
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
December 04, 2024, 12:58:49 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
