Pages: [1]
Author Topic: immo off me 3.8.2 please help  (Read 6935 times)
linssenp
Newbie
*

Karma: +2/-5
Offline Offline

Posts: 8


« on: March 18, 2014, 12:46:50 PM »

Hi

Can please help someone me make this 24c02 file   of my  me 3.8.2   to make immo off??

many thanks
Logged
ddillenger
Moderator
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #1 on: March 18, 2014, 12:49:50 PM »

This should be correct.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
linssenp
Newbie
*

Karma: +2/-5
Offline Offline

Posts: 8


« Reply #2 on: March 18, 2014, 12:51:35 PM »

Waw That quick, many thanks!!!
Logged
Lauria112
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 39


« Reply #3 on: July 17, 2014, 03:58:38 PM »

Could someone please verify that I did IMMO OFF correct for my ME 3.8.2

I did compare original from linssenp and modded from ddillenger but I am not sure if I did CS calcul correct.

By the way, is the SKC in this file also somewhere?
« Last Edit: July 17, 2014, 04:33:06 PM by Lauria112 » Logged
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 826


« Reply #4 on: July 17, 2014, 07:04:28 PM »

Could someone please verify that I did IMMO OFF correct for my ME 3.8.2
I did compare original from linssenp and modded from ddillenger but I am not sure if I did CS calcul correct.
By the way, is the SKC in this file also somewhere?

It should be OK........ Which ECU number is it?
Logged
Lauria112
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 39


« Reply #5 on: July 17, 2014, 10:43:43 PM »

It's 8D0 907 557 T.
And yes, it was OK, I finally soldered that back to ECU and got the car running again, almost two weeks without car can drive crazy

Thanks for your help
Logged
usuarionuevo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #6 on: December 07, 2020, 03:54:48 PM »

It's 8D0 907 557 T.
And yes, it was OK, I finally soldered that back to ECU and got the car running again, almost two weeks without car can drive crazy

Thanks for your help

yes but how to flash this bin, and what harware you need to do it..?
Logged
Lauria112
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 39


« Reply #7 on: December 07, 2020, 04:02:58 PM »

yes but how to flash this bin, and what harware you need to do it..?

I had something like G540 IC programmer and soldered small pieces of wire as legs to mount the chip. SMC adapter recommended tho.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)