Pages: [1]
Author Topic: A4 -95 1.8T AEB ecu change (IMMO questions)  (Read 4464 times)
teme69
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« on: April 14, 2014, 02:59:47 AM »

I need to do a ecu swap for audi a4 1995 with AEB engine. Ecu is ME3.8.2 I think(?) and the car has separate immo box.
Ecu number is 8D0907557  Bosch number 0261203550/551. Original ecu got somehow fried and the car is not starting anymore (Immo light goes off when trying to start). I have another used AEB ecu with matching part numbers but the immo is causing troubles.

What options do I have to get my car runnig with the spare ecu?
Could I just desolder eeprom 24C02 from my old ecu and solder it in the spare one?
I know that one option is to read contents of the original 24C02 and then write spare one with it, right? But what is the difference if I replace the whole 24C02 chip? Unfortunately I do not have any eeprom programmer so I could read/write the eeprom so any code swap/immo off mod would be hard to do.

It would be much appreciated if someone could help me.

 
 
Logged
ddillenger
Moderator
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #1 on: April 14, 2014, 08:38:00 AM »

Yes, swapping the 24C02 would be fine.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
teme69
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #2 on: April 14, 2014, 09:42:37 AM »

Yes, swapping the 24C02 would be fine.

Great news! Thank you very much!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)