Pages: [1]
Author Topic: pj rs6 base file for s4, ev14 550 , 90mm maf cant find CWMDAPP?  (Read 4297 times)
BraxS4
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 162




hey guys thanks for any advice, ive gone through hours of the forums and advice here and there, so far ive

scaled maf for 90mm

edited krkte and tvub for ev

set
FKKVS to 1s
KFKHFM to 1s
KFLDRAPP to 0s'

disabled egt's "dead" and rear o2 "still wired for zeitronix"

i cannot find CWMDAPP to set to 8

im using tuner pro, am i going in the correct direction? thanks guys


Logged

stage 3 b5 S4
BraxS4
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 162



« Reply #1 on: April 15, 2014, 10:48:54 AM »

and yes ive tried different m box xdf's.... maybe try a non m box?
Logged

stage 3 b5 S4
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #2 on: April 15, 2014, 11:05:36 AM »

181BD
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
BraxS4
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 162



« Reply #3 on: April 15, 2014, 11:15:58 AM »

ive searched for hex address with tuner pro.... comes up with nothing, i tried to add the scaler but did something wrong. can i open the xdf in text and maybe add a value? anyone have this if so? 
Logged

stage 3 b5 S4
catbed
Sr. Member
****

Karma: +8/-2
Offline Offline

Posts: 300


« Reply #4 on: April 15, 2014, 01:31:27 PM »

That scalar you created was correct. Stock value is 0
Logged
BraxS4
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 162



« Reply #5 on: April 15, 2014, 07:04:40 PM »

awesome, ill re attempt thanks
Logged

stage 3 b5 S4
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)