NefMoto > Technical > Tuning > МЕ3.8.3 - tuning KFLF and KFZW for loads above 10ms
Pages: 1 2 [3]
« previous next »
Author Topic: МЕ3.8.3 - tuning KFLF and KFZW for loads above 10ms  (Read 26323 times)
Dropout
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 53
« Reply #30 on: September 15, 2015, 02:05:15 PM »
A bit off topic, but is there anyway to have boost/load by gear, i.e. 1-st & 2-nd gear lets say 0.8bar 3-rd,4-th & 5-th 1.2bar (for example)
« Last Edit: September 15, 2015, 02:19:56 PM by Dropout » Logged
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825
« Reply #31 on: May 04, 2016, 12:50:56 PM »
Hi friends sorry to ask this, but anyone have test rescaling the load axis in any map? I mean extending up to 12ms LOAD for better high load resolution.
Logged
Dropout
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 53
« Reply #32 on: May 25, 2016, 09:42:07 PM »
Yes, I've been running with 12ms as the last load cell for over a year.
Logged
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825
« Reply #33 on: May 26, 2016, 04:56:01 AM »
Quote from: Dropout on May 25, 2016, 09:42:07 PM
Yes, I've been running with 12ms as the last load cell for over a year.

Dropout do you have notice some rare AFR behaviour during boost in your car? I mean some AFR sudden steps in engine operation during boost (high loads).
Logged
Dropout
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 53
« Reply #34 on: May 26, 2016, 09:43:37 PM »
No, I haven't had such issues. Currently my wideband is off the car but since I've put in H beam conrods I'll be retuning it soon and I'll provide logs.


P.S. my goal is to run 1.8-2.0 bars (hopefully hit around 400 bhp) on the factory boost control which means a lot of rescaling of maps.
« Last Edit: May 26, 2016, 09:48:02 PM by Dropout » Logged
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825
« Reply #35 on: May 27, 2016, 04:35:44 AM »
Quote from: Dropout on May 26, 2016, 09:43:37 PM
No, I haven't had such issues. Currently my wideband is off the car but since I've put in H beam conrods I'll be retuning it soon and I'll provide logs.
P.S. my goal is to run 1.8-2.0 bars (hopefully hit around 400 bhp) on the factory boost control which means a lot of rescaling of maps.

Nice to hear that Dropout. Just in case you or anyone will like to comment about it, to illustrate my issues there are --> http://nefariousmotorsports.com/forum/index.php?topic=9903.msg87391#msg87391. I have notice that always occur just after boost ramp finish.
« Last Edit: May 27, 2016, 04:42:30 AM by eliotroyano » Logged
Pages: 1 2 [3]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 04:41:17 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)