Hi, just discovered this awesome forum and all the software.
I logged my drive with vcds and if I'm right it looks like it runs very rich at idle and cruising (14mpg supports this).
It's a stage 3 2000 s4 with frankenturbos, 550cc ev14 injectors, hitachi maf, 4.0 bar fpr and so on with a mystery tune that I believe the PO did himself.

I saw that ME7logger csv's are preferred here but I can't get the ECU flashing software to connect to my ecu so I can read the file and then use the logger. I connect to the car via the obd port, open up the software and no connections are shown. What am I missing?

Please have a look at my cruise and WOT logs and let me know if anything stands out or teach me how to read and save my ecu file so I can log with me7logger if these vcds logs are no good.


thanks guys.

I can't even get the logger to connect. The ftdi driver just won't install. I used the .exe setup for my OS and it said it was successful but says otherwise in device manager. I tried to manually install the ftdi driver by going through device manager then browsing driver and selecting the amd64 folder and it just says unable to install driver. But vcds connects no problem. This is driving me crazy!

And enable the vcp mode in device properties>advanced, I found I needed that active