Enable DTC but disable CEL

Pages: [1]

« previous next »

Author

Topic: Enable DTC but disable CEL - 03 vs 01 ? (Read 4043 times)

elRey

Hero Member

Karma: +32/-1
Offline

Offline

Posts: 565

	Enable DTC but disable CEL - 03 vs 01 ? « on: May 04, 2014, 10:01:09 AM »

Hello,

I want to maintain DTC but prevent it from throw CEL/MIL.
Is it has simple as only have the first bit set and leave second bit zero in faultclass?

Specfically, I want misfires (all, even per cyl) DTCs to be enabled, but don't want them turning on CEL.

Thanks,
Rey


	Logged

ddillenger

Hero Member

Karma: +640/-21
Offline

Offline

Posts: 5640

	Re: Enable DTC but disable CEL - 03 vs 01 ? « Reply #1 on: May 04, 2014, 10:17:56 AM »

I'm not sure you can do that. The misfires have a different routine entirely for flashing the CEL if the threshold is reached. I don't think error classing will be sufficient.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

elRey

Hero Member

Karma: +32/-1
Offline

Offline

Posts: 565

	Re: Enable DTC but disable CEL - 03 vs 01 ? « Reply #2 on: May 04, 2014, 11:42:10 AM »

I don't mind the flashing CEL when actively misfiring. It's the presistent CEL due to stored misfire DTCs I'm trying to address.


	Logged

ddillenger

Hero Member

Karma: +640/-21
Offline

Offline

Posts: 5640

	Re: Enable DTC but disable CEL - 03 vs 01 ? « Reply #3 on: May 04, 2014, 12:02:28 PM »

Can I ask why you're willing to live with misfires and just hide the symptoms? Deka's at idle?


	Logged

elRey

Hero Member

Karma: +32/-1
Offline

Offline

Posts: 565

	Re: Enable DTC but disable CEL - 03 vs 01 ? « Reply #4 on: May 04, 2014, 02:10:05 PM »

Quote from: ddillenger on May 04, 2014, 12:02:28 PM

Can I ask why you're willing to live with misfires and just hide the symptoms? Deka's at idle?

Nail on the head. More specifically - right off idle. torque reserve handled idle, but any throttle (B_ll = false) and torque reserve is turned off. e.g. where KFMRESNL does not apply. Want to avoid a high temin to acheive 14.7

Also, dealing with a particularly bad set of 870s that vary quite a bit from one to the other.


« Last Edit: May 04, 2014, 02:11:46 PM by elRey »	Logged

ddillenger

Hero Member

Karma: +640/-21
Offline

Offline

Posts: 5640

	Re: Enable DTC but disable CEL - 03 vs 01 ? « Reply #5 on: May 04, 2014, 02:17:50 PM »

Any reason not to just modify NMIALU/MIDLU to be right above idle?

Just curious Tongue


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

September 28, 2024, 07:26:59 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search