Pages: [1]
Author Topic: Need definition to delete rear O2 8N0906018AP_369397_0003  (Read 5860 times)
dayofthejackal
Jr. Member
**

Karma: +7/-0
Offline Offline

Posts: 37



« on: May 21, 2014, 05:05:51 AM »

Desperately need a definition so I can delete the rear O2 and possibly add a bit of fuel overrun.
« Last Edit: July 21, 2014, 08:35:16 AM by dayofthejackal » Logged

DotJ Tuned - Look in HEX for DayoftheJackal
dayofthejackal
Jr. Member
**

Karma: +7/-0
Offline Offline

Posts: 37



« Reply #1 on: June 17, 2014, 02:41:26 AM »

I don't like to do this but bump!

I really need a definition for this file. For some reason this file is the only one that runs on my Audi A3 AUM. I have tried HN, HJ and the original FC all give a lumpy idle and the power cuts out under 2k, i've even tried a Revo remap (paid) and had the same problem and had to remove it.

There's something in this map that makes it run smooth and I need to find out what it is.

Or If anyone can think of what it could be or another type map that I can try.

I don't mind starting with a standard map, i'm quite capable of tuning (I've been tuning Saab's for a few years) but I haven't found a standard map that runs smooth.

The car has also been checked over for any problems and non found and has been dyno'd twice this year with really good results.
Logged

DotJ Tuned - Look in HEX for DayoftheJackal
tjwasiak
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 420


« Reply #2 on: June 17, 2014, 04:11:09 AM »

ESKONF: @10C51h
CLRSHK: @11D83h
CDHSH: @1819Eh
CDHSHE: @1819Fh
CDKAT: @181A3h
CDLASH: @181A5h
CDLATV: @181A7h
CDLSH: @181ABh
CWKONLS: @181BBh
CWDLSAHK: @18773h
CLRSKA: @19F6Ch

I am by no mean a pro so please use common sense when changing your file.
Logged
dayofthejackal
Jr. Member
**

Karma: +7/-0
Offline Offline

Posts: 37



« Reply #3 on: June 25, 2014, 05:13:30 PM »

ESKONF: @10C51h
CLRSHK: @11D83h
CDHSH: @1819Eh
CDHSHE: @1819Fh
CDKAT: @181A3h
CDLASH: @181A5h
CDLATV: @181A7h
CDLSH: @181ABh
CWKONLS: @181BBh
CWDLSAHK: @18773h
CLRSKA: @19F6Ch

I am by no mean a pro so please use common sense when changing your file.
Forgot to say Thanks.

It got me interested to actually look ME7 code.
I did about 40 hours of reading, notes and map finding and have come up with enough maps for a stage 1/2. I'm just putting finishing touches to it and going through AL/NLC code. I will post maps etc here when I'm done.
Logged

DotJ Tuned - Look in HEX for DayoftheJackal
funnix
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 76


1.8t AUM


« Reply #4 on: October 23, 2014, 06:03:00 AM »

Can someone help me to find more maps in the 018ap file?

I want to create an XDF file!
Logged
dayofthejackal
Jr. Member
**

Karma: +7/-0
Offline Offline

Posts: 37



« Reply #5 on: November 01, 2014, 07:42:17 AM »

Can someone help me to find more maps in the 018ap file?

I want to create an XDF file!

Here's a .kp and .csv I made and there's enough maps for a stage 2.
If I remember right, one of the maps has the axis wrong in my v2, but can't remember which one.
Logged

DotJ Tuned - Look in HEX for DayoftheJackal
funnix
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 76


1.8t AUM


« Reply #6 on: November 03, 2014, 12:20:16 AM »

Thank you dayofthejackal!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.034 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)