NefMoto > Technical > Communication Protocols > KWP1281 - Linux
Pages: [1]
« previous next »
Author Topic: KWP1281 - Linux  (Read 8083 times)
cronic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« on: May 26, 2014, 07:07:16 AM »
Hello,

i want to log my cars data(Audi a4 b5 1.6) and show them on a tiny display. Whats the easiest way to do that?

It has to run on linux, because i wanna put it on my RaspberryPi, so i can view the data on the display while im driving.

Maybe somone can give me a hint.

Thanks and regards,
cronic
Logged
userpike
Hero Member
*****

Karma: +22/-1
Offline Offline

Posts: 763
« Reply #1 on: May 26, 2014, 08:03:10 AM »
Quote from: cronic on May 26, 2014, 07:07:16 AM
Hello,

i want to log my cars data(Audi a4 b5 1.6) and show them on a tiny display. Whats the easiest way to do that?

It has to run on linux, because i wanna put it on my RaspberryPi, so i can view the data on the display while im driving.

Maybe somone can give me a hint.

Thanks and regards,
cronic



I think ME7logger will run on linux with the proper version available in the stickied thread in the logging section of this forum.
Logged
jimmcgee5
Full Member
***

Karma: +7/-7
Offline Offline

Posts: 201
« Reply #2 on: May 26, 2014, 10:15:02 AM »
Quote from: userpike on May 26, 2014, 08:03:10 AM
I think ME7logger will run on linux with the proper version available in the stickied thread in the logging section of this forum.
- Linux port added
   -> see "ME7Logger_Linux_DIST_10072013.tgz"
   Serial interfaces work using device /dev/ttyS*, as well as FTDI cables in serial mode
   using the kernel module ftdi_sio and device /dev/ttyUSB0.
   FTDI native mode is supported using libftdi1 and libusb1, both are already included
   in many Linux distributions.
   libftdi1: http://www.intra2net.com/en/developer/libftdi
   libusb1:  http://www.libusb.org/wiki/libusb-1.0
Logged
cronic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #3 on: May 29, 2014, 04:24:03 AM »
Hello , and thanks for reply.

I thought i need the Image of the ECU to log data with ME7?
Cause the A4 B5 is using KWP protocol, isnt that true?
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #4 on: May 29, 2014, 04:03:32 PM »
1.6 is siemens.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
cronic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #5 on: May 30, 2014, 08:50:40 AM »
Yes, its Siemens. Do you have an image for this?!
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #6 on: May 30, 2014, 11:36:57 AM »
ME7Logger works only on Bosch ME7 (duh).

For your Siemens you will need a KWP1281 implementation.
Personally I think it's a giant waste of time on the 1.6 engine. Buy something with a decent engine first Tongue
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 08:20:41 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)