Pages: [1]
Author Topic: Use different bins in a 018CG box?  (Read 3424 times)
Terror_Flynn
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 168


« on: June 22, 2014, 08:48:38 PM »

My ECU is 4B0906018CG
HW number: 0261207215
SW number: 1037360100
Engine code: AWT, wideband.

Can I flash my original bin file in a 4B0906018R box or are there some hardware differences between the ECU boxes that gonna mess it up? (Different memory size, no support for wideband?)
I wanna make an plug and play backup box.

Could I use some similar bin that might already have an good definition made and flash it in my CG box?
Which ones?

What problems am I gonna see if I do it like that? Maps at wrong adresses?
Logged

Audi A4 Avant 1.8t Quattro -2001 (AWT)
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2800



« Reply #1 on: June 23, 2014, 04:13:38 PM »

018ch should be cross flashable
Logged

Giving your mom a tuneup
Terror_Flynn
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 168


« Reply #2 on: June 25, 2014, 01:17:05 PM »

The CH box is from the AWM engine, right?
I think my AWT engine is very similar to that engine, hardware wise.
Logged

Audi A4 Avant 1.8t Quattro -2001 (AWT)
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)