Hi there,

I've got a 06a 906 032 hn Ecu (1.8t AUQ)
This Ecu makes problems by adapting the immobilizer via VCDS.

Says: System n.i.o in Channel 50 when entering Login.

First: i have both eeproms and both skc.
Adapting definitly doesn't work the Common Way with VCds.


So i thought: lets Copy the immo content from the Ecu Eeprom to the Cluster eeprom.


When i swap a Cluster i usually copy 1-100 to take over mileage, keys etc.


Any idea if this Works for the Ecu Eeprom too?

best regards.

Is the ecu immo off? You cannot adapt if it is.