Pages: [1]
Author Topic: 2.0 TFSI K04  (Read 7162 times)
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« on: June 23, 2014, 04:29:51 PM »

Looking for a definition file for this, I've fitted a K04 to the 1.8t, but need to steal the PID sections so I don't have to start from scratch.

Anyone got one lying around? Smiley Wub.
Logged
Beaviz
Full Member
***

Karma: +8/-4
Offline Offline

Posts: 190


« Reply #1 on: June 25, 2014, 12:22:52 AM »

Looking for a definition file for this, I've fitted a K04 to the 1.8t, but need to steal the PID sections so I don't have to start from scratch.

Anyone got one lying around? Smiley Wub.

Have them at home. Which maps is it that you specifically want? I do not have a fully defined file, but have the PID maps as far as I remember.
Logged
Beaviz
Full Member
***

Karma: +8/-4
Offline Offline

Posts: 190


« Reply #2 on: June 25, 2014, 12:41:39 PM »

Here you go.
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #3 on: June 25, 2014, 05:46:21 PM »

You hero!  3 downloads though, obviously someone else is snatching these up too!
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #4 on: June 26, 2014, 11:10:22 PM »

Not sure that KP file works.  I'm getting nothing here! Sad
Logged
Beaviz
Full Member
***

Karma: +8/-4
Offline Offline

Posts: 190


« Reply #5 on: June 27, 2014, 01:06:32 AM »

Did not test it at home. Will take a look tonight.

It was a messy project, so I tried to only export the selected maps in the map pack.
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #6 on: June 27, 2014, 03:25:34 AM »

If it's easier just PM me the the whole thing, I'll only be stealing the PID section anyway, none of the rest of it is valid to me. Smiley
Logged
Beaviz
Full Member
***

Karma: +8/-4
Offline Offline

Posts: 190


« Reply #7 on: June 27, 2014, 12:12:25 PM »

Just mailed the full project to you.
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #8 on: June 28, 2014, 03:12:25 AM »

Cannot thank you enough, this saves me so much time! Smiley

Hopefully can have this TFSI 1.8t on the road faster then, just need a clutch!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 18 queries. (Pretty URLs adds 0s, 0q)