Changing MAF reading from tapered to straight

Pages: [1]

« previous next »

Author

Topic: Changing MAF reading from tapered to straight (Read 4517 times)

kenrevo

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Changing MAF reading from tapered to straight « on: June 25, 2014, 08:38:58 AM »

I bought a 2001 Audi S4 that the owner started going stage 3 but ran into problems and decided to sell it. One of the problems is that the tune is an EPL tune for K04's, Ev14 52lb, 4 bar fuel pump, and a 85mm tapered MAF. The MAF on the car is a 034 open air element with a 85mm MAF which, I assume, is causing problems with my AFR creating my misfires. My AFR goes to ~7 on the high RPM.

I've looked for an EPL MAF housing to get the right one but no one is selling them separately. I was wondering if it would be easy, relatively speaking, to just adjust the tune from a tapered to a straight MAF housing or should I just start from scratch?

Eventually I plan on getting the car tuned but want to get intercoolers and downpipes before I spend lots of money on a tune. I don't have a wideband sensor but can take logs or post the ones just let me know.

Thanks


	Logged

tjwasiak

Sr. Member

Karma: +26/-0
Offline

Offline

Posts: 420

	Re: Changing MAF reading from tapered to straight « Reply #1 on: June 25, 2014, 08:48:51 AM »

I would start from scratch and tune it properly for hardware you are using.


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12271

	Re: Changing MAF reading from tapered to straight « Reply #2 on: June 25, 2014, 10:26:19 AM »

You will not be able to edit the EPL tune.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: Changing MAF reading from tapered to straight « Reply #3 on: June 25, 2014, 11:07:16 AM »

You might want to figure out why target lambda is 0.5.

The MAF housing has no direct connection to target lambda.


	Logged

kenrevo

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Re: Changing MAF reading from tapered to straight « Reply #4 on: June 25, 2014, 12:07:12 PM »

Quote from: phila_dot on June 25, 2014, 11:07:16 AM

You might want to figure out why target lambda is 0.5.

The MAF housing has no direct connection to target lambda.

I was told that since the MAF housing was wrong for the tune, what will cause my AFR to be off causing my misfire. I attached my csv files if you want to look.


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Changing MAF reading from tapered to straight « Reply #5 on: June 25, 2014, 12:11:05 PM »

How did you get an EPL tune without their fueling kit?

I don't want to make accusations, but it seems as though you're trying to do something untoward.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12271

	Re: Changing MAF reading from tapered to straight « Reply #6 on: June 25, 2014, 12:29:36 PM »

Target lambda is not .5

I'm seeing:
EGT sensor activity (bad EGT, or you have very high egts)
EGT enrich to .7
Also, your O2 voltages look really really bad.


	Logged

kenrevo

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Re: Changing MAF reading from tapered to straight « Reply #7 on: June 25, 2014, 12:33:48 PM »

Quote from: ddillenger on June 25, 2014, 12:11:05 PM

How did you get an EPL tune without their fueling kit?

I don't want to make accusations, but it seems as though you're trying to do something untoward.

It's what came with the car, as I said the car was pieced together [badly].

Also the logs are in second gear, I don't have a good place to do 3rd gear pulls.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 30, 2024, 08:28:24 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search