Innovate LM2 rpm issues on 1.8t

Pages: [1]

« previous next »

Author

Topic: Innovate LM2 rpm issues on 1.8t (Read 5235 times)

aef

Hero Member

Karma: +70/-46
Offline

Offline

Posts: 1601

	Innovate LM2 rpm issues on 1.8t « on: July 01, 2014, 02:08:58 PM »

Hi,

i logged my 1.8t AGU (M3.83) with the Innovate LM2 hand held device and used the ecu-to-cluster RPM Signal.
What can cause this rpm issues. Its the black line with flat tops and drops.


« Last Edit: July 01, 2014, 10:44:59 PM by aef »	Logged

aef

Hero Member

Karma: +70/-46
Offline

Offline

Posts: 1601

	Re: Innovate LM2 rpm issues on 1.8t « Reply #1 on: July 01, 2014, 10:45:47 PM »

here is the missing image...


	Logged

eliotroyano

Hero Member

Karma: +48/-8
Offline

Offline

Posts: 826

	Re: Innovate LM2 rpm issues on 1.8t « Reply #2 on: July 02, 2014, 10:21:44 AM »

Quote from: aef on July 01, 2014, 02:08:58 PM

Hi,
i logged my 1.8t AGU (M3.83) with the Innovate LM2 hand held device and used the ecu-to-cluster RPM Signal.
What can cause this rpm issues. Its the black line with flat tops and drops.

I have a similar connection but with an Innovate SSI4, and I used a 2KOhm resistor as pull-up to clean the signal and have the best shape possible. I confirm it with an oscilloscope. Did you use or try with it?


	Logged

aef

Hero Member

Karma: +70/-46
Offline

Offline

Posts: 1601

	Re: Innovate LM2 rpm issues on 1.8t « Reply #3 on: July 02, 2014, 10:41:53 AM »

I just update the Innovate Firmware and will try the 2kohm resistor aswell.

Thank you sir!


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 11:17:12 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search