Pages: [1]
Author Topic: me2.10.4 maf and injector scaling  (Read 5133 times)
johnwood1988
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« on: July 06, 2014, 09:02:38 AM »

ive been creating a definition file for a few weeks now ive got everything sorted but the maf scaling and the injector scaling can any help me or point me in the right direction.
Logged
KrumB
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #1 on: July 21, 2014, 08:57:01 AM »

Hello,

I've been searching for def file for me 2.1 with no luck so far. Could you share your def file with me as it may give me some directions?

Regards
Logged
redtop
Jr. Member
**

Karma: +5/-0
Offline Offline

Posts: 44


« Reply #2 on: August 27, 2014, 12:57:18 PM »

This document will probably help you!  Smiley
Logged
johnwood1988
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« Reply #3 on: August 27, 2014, 01:26:07 PM »

hi sorry that does not help me im struggling to find the maps as i dont know what they look like
Logged
redtop
Jr. Member
**

Karma: +5/-0
Offline Offline

Posts: 44


« Reply #4 on: August 27, 2014, 11:41:17 PM »

Check out this web site on file. I don't know Portuguese, but I used Google Translate. It works good enough.
Unfortunately it isn't online anymore.
Logged
poxxxy
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #5 on: April 18, 2017, 06:05:16 AM »

redtop thanks for sharing that... waybackmachine does not have the images stored in the archive and I was struggling to locate Smiley.
Logged
overspeed
Sr. Member
****

Karma: +21/-5
Offline Offline

Posts: 383



« Reply #6 on: April 18, 2017, 09:06:30 AM »

There are some few errors in this document...

for example MAF limites, are not exactly what is explained there and the last one (temperature) is actually the IAT and TMOT calibration map (translate voltagem on sensor to temperature).

Never found FGATO on these ECU.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)