Absolute pressure compensation

Pages: [1]

« previous next »

Author

Topic: Absolute pressure compensation (Read 4084 times)

turdburglar44

Full Member

Karma: +5/-1
Offline

Offline

Posts: 110

	Absolute pressure compensation « on: July 11, 2014, 12:29:18 PM »

So I have done a lot of reading and haven't quite found a definite answer to a few things; (and I haven't logged anything yet >.<)

LDRXN is targeting load based on absolute pressure correct? so the stock table with a peak around 8 psig (22.7psia @ sea level )should be giving me about 10.7psig at my altitude ( about 12 psia ) right? but instead I am seeing only 8 psi...

my only guess to why I'm not seeing 10.7 psig is either KFLDIMX is limiting my duty cycle or my pressure ratio is capped by KFLDHBN.

sorry for such a novice question but any guidance (even just a link) is appreciated.


	Logged

Tuning is the easy part...

elRey

Hero Member

Karma: +32/-1
Offline

Offline

Posts: 565

	Re: Absolute pressure compensation « Reply #1 on: July 11, 2014, 12:36:20 PM »

what requested boost do you see in your logs? 8 or 10?


	Logged

turdburglar44

Full Member

Karma: +5/-1
Offline

Offline

Posts: 110

	Re: Absolute pressure compensation « Reply #2 on: July 11, 2014, 12:40:02 PM »

I haven't done any logging yet. bored at work trying to wrap my head around the basic concepts and make a decent stg1 base map. When I bought the car it had a Cheapo boost gauge on it. that's the only reason I know boost pressure. gauge could have been inaccurate...


« Last Edit: July 11, 2014, 12:44:03 PM by turdburglar44 »	Logged

Tuning is the easy part...

turdburglar44

Full Member

Karma: +5/-1
Offline

Offline

Posts: 110

	Re: « Reply #3 on: July 11, 2014, 01:40:27 PM »

I guess my question is am I understanding the use of these maps and their units correctly?


	Logged

Tuning is the easy part...

jibberjive

Hero Member

Karma: +23/-2
Offline

Offline

Posts: 536

	Re: Absolute pressure compensation « Reply #4 on: July 14, 2014, 10:26:10 PM »

First thing to do is log. Also, keep in mind that you mechanical boost gauge was likely calibrated at sea level as well.


	Logged

turdburglar44

Full Member

Karma: +5/-1
Offline

Offline

Posts: 110

	Re: « Reply #5 on: August 06, 2014, 01:19:29 PM »

After logging I have learned that yes the ecu does factor atmospheric pressure into load. It seems to me that it also factors in the compressor map somehow. Ie; 10psi @3k rpm is much lower load than 10psi @6krpm. Does kfldhbn limit boost in me7.5? My findings would point towards 'yes it does.' (I have since found and sorted out mechanical issues with my boost control)


	Logged

Tuning is the easy part...

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 11, 2024, 04:42:49 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search