Pages: [1]
Author Topic: Push-On Coil Swap ECU Changes - Please confirm done correctly  (Read 3711 times)
AudiMan85
Full Member
***

Karma: +21/-7
Offline Offline

Posts: 215



WWW

Ok, so finished up the push on coil conversion/ICM delete. I am running the Bremi 077905115H coils and I wanted to make sure the information I input into my tuned file is correct.

Below is the excel spreadsheet that was post on here and I used the values and copied over to my file. I checked and the my axis matched up. Could someone take a look and make sure the changes are correct.

Thank you,
Kendel

Car Info
MY2000 A6 flashed to NVR-Stage2++ L-Box
Logged

"Ride like I got a horse stable under my hood" ~ The Game - Too Much
Snow Trooper
Hero Member
*****

Karma: +90/-24
Offline Offline

Posts: 689


WWW
« Reply #1 on: July 12, 2014, 01:12:46 PM »

All these coils conversions are pointless. The stock coils are better. Companies that push the conversion are just selling you something that you don't need and shouldn't want.  Switch back.
Logged

cartoons?
6A 61 72 65 64 40 76 6C 6D 73 70 65 63
AudiMan85
Full Member
***

Karma: +21/-7
Offline Offline

Posts: 215



WWW
« Reply #2 on: July 12, 2014, 01:34:28 PM »

I did it cause I couldn't afford ICM's left and right, and the stock coil were on there way out also. The 3 ICM's I have bought in 3 years was more then the $90 I spent on the push on coils (just spent $40 more on Touareg plates).

The car also feels way smoother, sure BRAND NEW (OTB) ICM's and 6 BRAND NEW (OTB) Bolt On's would feel good too tho.
« Last Edit: July 12, 2014, 01:55:41 PM by AudiMan85 » Logged

"Ride like I got a horse stable under my hood" ~ The Game - Too Much
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)