Pages: [1]
Author Topic: help with tune  (Read 5853 times)
adman
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 19


« on: July 14, 2014, 03:30:52 PM »

Would love some help with my tune if possible? I have uprated DVs, downpipes with no cats, borla cat back system, k and n panel filter and larger intercoolers. I have been told I should be getting higher hp values. In NZ the best gas available is 98. I have tried all sorts and had allsorts of issues. This tune is the best results so far
« Last Edit: July 14, 2014, 04:14:30 PM by adman » Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12268


WWW
« Reply #1 on: July 14, 2014, 04:33:49 PM »

get a log w/o you rolling on the throttle.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
adman
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 19


« Reply #2 on: July 15, 2014, 03:35:12 PM »

hi here is another log as requested. I have an ok understanding but not great. I think my stats are low for hp and maf readings and my afr seems to rich. But doing the real fine tuning i am struggling with.
 
I would appreciate some help with this.  Cheers in advance.
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2801



« Reply #3 on: July 15, 2014, 06:32:35 PM »

what hardware are your injectors stock? maf size ?
Logged

Giving your mom a tuneup
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12268


WWW
« Reply #4 on: July 15, 2014, 07:51:36 PM »

Do you have a wideband log? Your AFR request looks fine, but your O2 voltages don't make any sense.

Also, your wgdc during spool isn't so hot.. you have way too much Q2 at low rpms.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
adman
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 19


« Reply #5 on: July 16, 2014, 11:16:21 PM »

Maf is stock and so are injectors. In the near future I am looking  at k04 s a x 440 cc injectors and larger maf with wide band sensors. So I was going to
pull the motor do clutch and cambelt etc....

Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12268


WWW
« Reply #6 on: July 17, 2014, 10:32:19 AM »

I'm trying to figure out what you mean by your afr being rich..
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)