Pages: [1]
Author Topic: Slow int failed.  (Read 5949 times)
masterr
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« on: July 20, 2014, 04:00:31 AM »

Hi! I am fighting with NefMoto 3rd day and I still can not connect to my car (Audi TT 8N, APX engine).
Of course I have installed correct drivers and I tried every speed baud.
When I am connecting with slow int:

With fast int I can not change speed baud (when I press connect button it is set always to the 124800 Baud), but it connects to my car. Unfortunately I can not do anything else.
Logged
masterr
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #1 on: July 20, 2014, 04:50:24 AM »

Screens:

Logged
turboat
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619


« Reply #2 on: July 20, 2014, 06:05:44 AM »

Pics no work. On the bench or in the car?
Logged
masterr
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #3 on: July 20, 2014, 06:29:54 AM »

http://postimg.org/image/ouebgcqax/
http://postimg.org/image/804ix0x0p/
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #4 on: July 20, 2014, 07:42:10 PM »

Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
masterr
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #5 on: July 21, 2014, 12:29:17 PM »

Thanks for helping...
Logged
turboat
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619


« Reply #6 on: July 21, 2014, 04:14:20 PM »

Are you trying to bench flash or do it in car? If car, try pulling the cluster fuse, if bench, try powering up pin 121
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 15 queries. (Pretty URLs adds 0s, 0q)