Pages: [1]
Author Topic: A3 1.8Tq 032AC With TTE  (Read 8422 times)
Iaus
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« on: July 21, 2014, 01:54:31 PM »

Hi, 

Starting a new project.
Car spec A3 1.8Tq with 5doors Smiley not very nice but works.  Have 184000km on on speedo.
Are going to run TTE 280 turbo.  Just for trying.   Any one else tried this Turbo.
Have used several Franken earlier but wanted to try this to test.
Have tried both Franken F21 and F23 earlier.  So time will show how much better this more expensive turbo is

Have new rods to mount,  unsure if i am going to use ebay/kina manifoil or do someone have a tip for another Good Exhaust manifoil.
550cc injectors
 
Logged
Iaus
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #1 on: November 30, 2014, 09:39:12 AM »

Have not had time for this jet, 
Only mounted Milltek non-res Catback from S3 with homemade diesel tips. And Ebay downpipe. and stg1 chip
Still need a Clutch flywheel solution.  I normaly only use Sachs Raceenginering.  Have once used a Spec clutch on a S2 avant for a couple of years ago.

What can be recomanded for for this.  cheap and good.  Nice if it can hold 350-400hp

 
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)