S4addict
Full Member
Karma: +1/-0
 Offline
Posts: 80
|
 |
« on: July 22, 2014, 05:52:12 PM »
|
|
|
hello all first off i hope i am placing this in the right fourm
i have a 2001 audi s4 i am trying to flash to get the bin off so i can make my log file
some info
its a giac tune
i have a generic ebay cable
and when i try and connect it says its rejected and then just keeps communicating timing
i can scan with vagcom i can also get the info from the ecu with the me7 program
is this somthing ill just have to flash over?
any help is greatly appreciated
|
|
|
|
|
Logged
|
|
|
|
|
TCSTigersClaw
|
|
« Reply #1 on: July 23, 2014, 03:32:02 AM »
|
|
|
GIAC must be protected just like REVO and other tuners.
You can`t read your flash.. at least not without boot mode .you have to work on another .ori
|
|
|
|
« Last Edit: July 23, 2014, 03:34:08 AM by TCSTigersClaw »
|
Logged
|
VAG cars newbie tuner  |
|
|
|
TCSTigersClaw
|
|
« Reply #2 on: July 23, 2014, 03:33:30 AM »
|
|
|
Also if GIAC messes with your e2p like revo you have to flash that too with a known immo code ( I think in the Immo section there are some files) ,or with an immo off.
|
|
|
|
|
Logged
|
VAG cars newbie tuner |
|
|
S4addict
Full Member
Karma: +1/-0
Offline
Posts: 80
|
|
« Reply #3 on: July 23, 2014, 04:16:36 AM »
|
|
|
Well as far as i know i dont have an immo
My keys arent even coded to the car
Ive been told thats part of the immo
And my car starts and runs everytime
So with that being said i should be fine to
Flash over the giac right?
|
|
|
|
|
Logged
|
|
|
|
|
TCSTigersClaw
|
|
« Reply #4 on: July 23, 2014, 04:22:04 AM »
|
|
|
Well yes , flash over GIAC ...with an ori and start from there.
In your case I would boot the ECU read the flash and the e2p for backup and then do whatever you want
|
|
|
|
|
Logged
|
VAG cars newbie tuner |
|
|
S4addict
Full Member
Karma: +1/-0
Offline
Posts: 80
|
|
« Reply #5 on: July 23, 2014, 05:20:52 AM »
|
|
|
Ive tried the boot with the cable i have and it doesnt get anywere
Im also starting to think maybe my cable just sucks aswell
|
|
|
|
|
Logged
|
|
|
|
|
TCSTigersClaw
|
|
« Reply #6 on: July 23, 2014, 11:37:06 PM »
|
|
|
Please read carefully the forums and the Wiki.. You can`t perform boot with a KKL ebay cable , only with Galletto or genuine tools....
|
|
|
|
|
Logged
|
VAG cars newbie tuner |
|
|
|
Lost
|
|
« Reply #7 on: July 24, 2014, 12:20:36 AM »
|
|
|
Please read carefully the forums and the Wiki.. You can`t perform boot with a KKL ebay cable , only with Galletto or genuine tools....
Mpps works as well |
|
|
|
|
Logged
|
|
|
|
|
TCSTigersClaw
|
|
« Reply #8 on: July 24, 2014, 03:23:14 AM »
|
|
|
Mpps works as well
hehe MPPS is included in "genuine tools" but I guess other clones can do the trick too ,ok |
|
|
|
|
Logged
|
VAG cars newbie tuner |
|
|
S4addict
Full Member
Karma: +1/-0
Offline
Posts: 80
|
|
« Reply #9 on: July 24, 2014, 03:51:02 AM »
|
|
|
This is true i have read alot of information
I think i mostly tried it for the hell of it.
Apon taking the plastic shell off my cable i can see the
Ftdi chip so now im making sure the drivers and such
Installed right
|
|
|
|
|
Logged
|
|
|
|
|
Lost
|
|
« Reply #10 on: July 26, 2014, 02:21:42 PM »
|
|
|
hehe MPPS is included in "genuine tools" but I guess other clones can do the trick too ,ok hehe, didn´t know that |
|
|
|
|
Logged
|
|
|
|
|
