hello im comparing files to figure out why im getting a boost cut.
i will post logs tomorow to make sure the logs are correct but with reading and comparing files ive found this
the base file im tweaking is nvrs stage2 plus file
the one im comparing it to is my old giac file
lamfa of the giac file
 
and this is the lamfa of nvrs

im asuming the numbers in nvrs file is stock?
i have not been able to compare it to a stock file.
any opinons on what would be best ive been reading alot but still have alot to learn

ok will do ill have logs posted tomorow and thank you for that info
ill stop wasting my time trying to compare a file that is jibberish

(insert amazement at how bad those graphs are here)

You need your x-axis to be RPM, then plot the data on one of the y-axis. Otherwise, post the entire csv.

Man, you need to at least log the right things!

Read this. Log everything suggested:


http://www.audizine.com/forum/showthread.php/479416-****-Complete-Guide-on-How-to-Take-and-Graph-Logs-****

Your choice of axis is truly baffling.

ok so here the corrected data i double checked and made sure i logged all the stuff listed.

It didnt log that?
The log was from around 3k to 6k
If i have to relog again i will