Pages: [1]
Author Topic: HELP!! First read, car won't start afer  (Read 9217 times)
thelastleroy
Sr. Member
****

Karma: +19/-2
Offline Offline

Posts: 260



« on: August 18, 2014, 05:56:35 PM »

I had some trouble reading my car, tried to read with a few different memory layouts. Finally I realized that the baud rate had to be readjusted down to read. I got a full sucessful read which I am posting here, with the 29F800BB layout.

The car wont start now, what should I try next? I could really use some help on this.
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #1 on: August 18, 2014, 05:59:42 PM »

Is the ecu still live? can you connect to it with vcds or nefmoto software? if so flash your read back if not live you bricked it
good luck
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
thelastleroy
Sr. Member
****

Karma: +19/-2
Offline Offline

Posts: 260



« Reply #2 on: August 18, 2014, 06:03:58 PM »

Yes, I can connect to it again. I'll go and try to reflash the file I just read.
Logged
thelastleroy
Sr. Member
****

Karma: +19/-2
Offline Offline

Posts: 260



« Reply #3 on: August 18, 2014, 06:18:52 PM »

Genius! It's alive. Thank you for your quick reply and consideration for new-guy cludges. Now on to find an appropriate XDF. Thanks again
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #4 on: August 18, 2014, 06:24:37 PM »

Could you post your log file so I can see what happened? I'm wondering if your ECU thinks that it needs to be reprogrammed because I asked it to validate it's checksum during the read.
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #5 on: August 18, 2014, 06:26:14 PM »

glad your up and running, the ak is very well defined and you could use that to make your own xdf
good luck
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
thelastleroy
Sr. Member
****

Karma: +19/-2
Offline Offline

Posts: 260



« Reply #6 on: August 18, 2014, 06:35:13 PM »

Could you post your log file so I can see what happened? I'm wondering if your ECU thinks that it needs to be reprogrammed because I asked it to validate it's checksum during the read.

Here's the log in a word file. (whoops, new file)
« Last Edit: August 18, 2014, 06:39:20 PM by thelastleroy » Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #7 on: August 18, 2014, 06:39:59 PM »

Could you post your log file so I can see what happened? I'm wondering if your ECU thinks that it needs to be reprogrammed because I asked it to validate it's checksum during the read.

Hey Tony. This happens on the following flashes:

Allroad/A6:
4Z7907551S and 551A

MK4:
06A906032RN

B6:
8E0910518BC
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
thelastleroy
Sr. Member
****

Karma: +19/-2
Offline Offline

Posts: 260



« Reply #8 on: August 18, 2014, 06:48:50 PM »

Hey Tony. This happens on the following flashes:

Allroad/A6:
4Z7907551S and 551A

MK4:
06A906032RN

B6:
8E0910518BC

Go figure. I get one of the oddballs. Where do I find this number for my car? Is it the "Vehicle Manufacturer ECU Hardware Number" or the "Calibration Date"?

Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #9 on: August 18, 2014, 09:37:27 PM »

http://nefariousmotorsports.com/forum/index.php?topic=981.0title=
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
TCSTigersClaw
Sr. Member
****

Karma: +15/-6
Offline Offline

Posts: 353



« Reply #10 on: August 19, 2014, 03:55:42 AM »

maybe stupid question but after READ did you click Disconnect ? I had an issue once....When you write it disconnects automatically , when you read it doesnt. I don`t know how this can effect the ECU  , when programming is complete
Logged

VAG cars newbie tuner Smiley
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #11 on: August 19, 2014, 08:40:29 AM »

Thanks for posting the log file. Very strange that reading the ECU would cause this issue. Definitely something I want to fix because most users don't expect a read to cause the car to stop working.

Things I can think of that the NefMoto software does that could cause this:
-Not disconnecting after a read
-Doing checksum validations before reading each memory sector may cause the ECU to think it isn't properly programmed
-Not doing a checksum validation for the whole memory range when finished reading


It was also weird that you could only connect at 52800 baud. Other baud rates were rejected with a security access error. I wonder if it was the specific baud rate that worked, or if it was something to do with changing the baud rate and starting a new diagnostic session.
« Last Edit: August 19, 2014, 12:34:26 PM by Tony@NefMoto » Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« Reply #12 on: September 04, 2014, 03:02:55 PM »

Its very common problem with all flashers. I know nothing about KWP etc, but from my expirience its very important to turn ignition off even after identifying otherwise you will get "programming not finished".
Logged
tommy88
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #13 on: September 24, 2014, 08:22:24 AM »

Hi,

i think i am having the same problem.
After reading the ECU i get these DTCs an the car wont start.
Can someone please check if the bin is correct so i can try to flash it like its said earlier in the thread.

Logged
thelastleroy
Sr. Member
****

Karma: +19/-2
Offline Offline

Posts: 260



« Reply #14 on: September 27, 2014, 08:35:38 AM »

Is the ecu still live? can you connect to it with vcds or nefmoto software? if so flash your read back if not live you bricked it
good luck

Give it a go. Hope it works out!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 17 queries. (Pretty URLs adds 0s, 0q)