Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002)

Pages: 1 ... 39 40 [41] 42

« previous next »

Author

Topic: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) (Read 523405 times)

Ephry

Newbie

Karma: +1/-0
Offline

Offline

Posts: 16

	Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) « Reply #600 on: September 01, 2017, 05:58:34 PM »

Quote from: nyet on September 01, 2017, 05:12:18 PM

Absolutely pointless. MBCs are for people who provably can't tune N75 properly.

Gotcha. I definitely have a loooooooot of reading and trials ahead.


	Logged

Herm99

Newbie

Karma: +0/-4
Offline

Offline

Posts: 17

	Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) « Reply #601 on: January 13, 2018, 02:41:48 PM »

Sorry to ask but was the stage 2 xdf ever shared in this thread?

I have the stage1 xdf and the full mbox xdf, but honestly there is such a huge difference between the 2. The stage1 xdf is awesome, the full mbox xdf is thoroughly confusing.

Any chance someone can point me to stage 2 xdf for mbox?


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) « Reply #602 on: January 13, 2018, 10:05:16 PM »

Quote from: Herm99 on January 13, 2018, 02:41:48 PM

There are not multiple xdfs, dude.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

KasperH

Hero Member

Karma: +24/-8
Offline

Offline

Posts: 630

	Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) « Reply #603 on: January 14, 2018, 05:54:58 AM »

Quote from: Herm99 on January 13, 2018, 02:41:48 PM

If you have a fully defined .xdf, then you basically have stage X
(X=insert arbitrary number here).

As in fully defined; you have all maps at you disposal.


	Logged

Herm99

Newbie

Karma: +0/-4
Offline

Offline

Posts: 17

	Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) « Reply #604 on: January 14, 2018, 03:24:23 PM »

Kasper, I'm aware of that. My question was, is there an in between of the 2, but apparently not.
The stage1 xdf that daz had left us was nice and simple, maybe too simple? The full xdf has an overwhelming amount of maps/tables in it, with so many obscure ones.

Perhaps I got spoiled by tactrix/romraider for subaru where the xdf tables are very defined and clear. And I always had daz help me with my S4 bins and never had much time to learn me7 until now. Anyways, motor on!


	Logged

FlyboyS4

Full Member

Karma: +20/-1
Offline

Offline

Posts: 215

	Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) « Reply #605 on: January 14, 2018, 05:19:17 PM »

Quote from: Herm99 on January 13, 2018, 02:41:48 PM

After the start with the bare bones Stage 1 XDF we just used the full XDF, so there is no Stage 2 XDF.

I did try to summarize the changes in the Stage 2 tune and mention what the table did along with giving the name.

The summary is here -> http://www.myaudis4.com/stage-2/.


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) « Reply #606 on: January 14, 2018, 07:57:32 PM »

Quote from: FlyboyS4 on January 14, 2018, 05:19:17 PM

After the start with the bare bones Stage 1 XDF we just used the full XDF, so there is no Stage 2 XDF.

This.. sorry about the confusion. The "stage 1 xdf" is just a "noob" version of the full xdf.

Just use the full xdf.


	Logged

MetalForLive

Full Member

Karma: +0/-0
Offline

Offline

Posts: 86

	Re: Nefmoto community project: Stage1 2.7t ME7.1 (APB) « Reply #607 on: July 20, 2018, 04:11:12 AM »

Quote from: ddillenger on September 23, 2014, 08:43:27 PM

Here is how I view logs for timing work:

If the camshaft angle is 0, that means KFZW is being used. If it is 22, that means we're in KFZW2.

In this log, we can see that from 3800 onward the values in KFZW are being used. Prior to that, it is KFZW2.

We can also see two knock events. One at 2200rpm, 150ish load. One at 2500, 160ish load. Take a look at the values for in KFZW where 2500rpm and 150 load intersect. Reduce timing in that area. NOTE! Just because CF is 3, does not mean you have to pull 3 degrees! One knock event at that RPM means CF's will be 3. This is actually not bad, and can be left as is, but I wanted to post for illustration purposes.

I would then suggest making sure KFZW/KFZW2 have the same values around 140-160 load at 3500-4000rpm to reduce the notch in timing. After that, relog. If you are not showing any CF's, I would then suggest adding more timing up top, from 4500 onward (to KFZW).

I have another Question about KFZW and KFZW2:
Are the values in the table the angle of the Crankshaft when the Ignition is initiated ?


	Logged

KasperH

Hero Member

Karma: +24/-8
Offline

Offline

Posts: 630

	Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) « Reply #608 on: July 22, 2018, 11:52:11 AM »

It is either BTDC or ATDC(-) and 0 is TDC


	Logged

camlacen

Newbie

Karma: +1/-0
Offline

Offline

Posts: 1

	Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) « Reply #609 on: July 29, 2018, 12:39:51 AM »

I wanted to flash this to a 2000 A6 but I have a bosch MAF so I edited the file. The only changes were for the MAF


	Logged

o2bad455

Newbie

Karma: +0/-0
Offline

Offline

Posts: 15

	Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) « Reply #610 on: September 02, 2018, 10:54:22 AM »

Quote from: camlacen on July 29, 2018, 12:39:51 AM

I wanted to flash this to a 2000 A6 but I have a bosch MAF so I edited the file. The only changes were for the MAF

I've got a near stock 2000 S4 6MT with OEM Bosch MAF. I've flashed another 551A bin but this would be my first attempt at flashing a 551M bin. Running Verify Checksums in Nefmoto hung the program, so I ran me7check on camlacen's above bin but received the following errors:

me7check v1.12 (c) mki, 06/2004-05/2012
Checking file stg1boschm.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = embedded in CPU, asume 05.12/05.32
-> EPK = 40/1/ME7.1/5/6005.01//22m/DstC2o/011200//
-> Contents of ECUID data table:
- '0261207143' (SSECUHN)
- '1037360857' (SSECUSN)
- '8D0907551M ' (VAG part number)
- '0002' (VAG sw number)
- '2.7l V6/5VT ' (engine id)
-> Contents of ECUID data table:
- 'HW_MAN004'

Page checksum failure(s) found
Data area checksum failure(s) found
-> Found 4 errors!!! *******************************

Should I try to fix these errors using me7sum (it would be my first use of that software), or is there another issue?


	Logged

Audi B5 S4 6MT, VW MkV TDI DSG, Smart MkI cdi, VW MkI race cars (road and ice).

KasperH

Hero Member

Karma: +24/-8
Offline

Offline

Posts: 630

	Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) « Reply #611 on: September 04, 2018, 03:20:17 AM »

Quote from: o2bad455 on September 02, 2018, 10:54:22 AM

Yes, always.


	Logged

o2bad455

Newbie

Karma: +0/-0
Offline

Offline

Posts: 15

	Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) « Reply #612 on: September 05, 2018, 09:52:50 AM »

Done. Attached are two Nef Stage 1 bins adjusted for Bosch MAF, with the second being optionally adjusted to avoid a nuisance communications DTC on non-CAN-bus cars (such as my 03/2000 build date S4 6MT). I've briefly tested both with no unexpected issues, but have yet to do logging (and one of my recently replaced exhaust flex couplings just let go on my way to get stickered, so it might be a while).


	Logged

Audi B5 S4 6MT, VW MkV TDI DSG, Smart MkI cdi, VW MkI race cars (road and ice).

player

Full Member

Karma: +1/-5
Offline

Offline

Posts: 130

	Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) « Reply #613 on: August 07, 2019, 09:59:38 AM »

will this work on my s4 AGB 8D0907551C ? will the NefMStg1BoschCWCANR work spot on? thx


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Nefmoto community project: Stage1 2.7t ME7.1 S4 (APB 8D0907551M-0002) « Reply #614 on: August 07, 2019, 11:00:26 AM »

Quote from: player on August 07, 2019, 09:59:38 AM

will this work on my s4 AGB 8D0907551C ? will the NefMStg1BoschCWCANR work spot on? thx

No. Thats a 512k ECU
http://files.s4wiki.com/stock/part-numbers.txt


	Logged

Pages: 1 ... 39 40 [41] 42

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 11:02:45 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search