Pages: [1] 2
Author Topic: KFZW/KFZW2 and some  (Read 16644 times)
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« on: May 31, 2011, 06:30:27 PM »

http://www.nefariousmotorsports.com/forum/index.php?action=dlattach;topic=219.0;attach=216

Is for 2001 1.8t CH box

Hey guys, Im having trouble finding KFZW/KFZW2
I'm right on them, but I can't quite get it:
I found them:
KFZW   1256C      12 by 13
KFZW2 12620       12 by 14?

I was under the impression that they should be the same size? Did I do something wrong? Maybe a line in KFZW2 is 1 to much?
Thanks in advance.

On another note, I came up with:

KFZWOP       1198A;  Y axis 134DE; X axis 16478
KFZWOP2     11A3A; "same                               "
I'm pretty sure the x axis is right, but am unsure as of the y axis. Thanks.
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #1 on: September 14, 2011, 03:35:21 PM »

KFZW and KFZW2 are the same size.
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #2 on: September 15, 2011, 02:54:09 AM »

Yeah, I figured that out. I appreciate the reply none the less. Thanks Tony.
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
setzi62
Full Member
***

Karma: +142/-0
Offline Offline

Posts: 249


« Reply #3 on: September 15, 2011, 08:57:43 AM »

http://www.nefariousmotorsports.com/forum/index.php?action=dlattach;topic=219.0;attach=216

Is for 2001 1.8t CH box

Hey guys, Im having trouble finding KFZW/KFZW2
I'm right on them, but I can't quite get it:
I found them:
KFZW   1256C      12 by 13
KFZW2 12620       12 by 14?

I was under the impression that they should be the same size? Did I do something wrong? Maybe a line in KFZW2 is 1 to much?
Thanks in advance.

On another note, I came up with:

KFZWOP       1198A;  Y axis 134DE; X axis 16478
KFZWOP2     11A3A; "same                               "
I'm pretty sure the x axis is right, but am unsure as of the y axis. Thanks.

For KFZWOP, KFZWOP2 you are right about the axes
(unless the fact I normally define X and Y swapped compared to your view).

KFZW at 12548
KFZW2 at 12608
Both are 16x12 (nmot_w x rl_w), axes at 13500 (nmot_W) and 13564 (rl_w)
Logged
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #4 on: September 17, 2011, 11:03:00 AM »

http://www.nefariousmotorsports.com/forum/index.php?action=dlattach;topic=219.0;attach=216

Is for 2001 1.8t CH box

Hey guys, Im having trouble finding KFZW/KFZW2
I'm right on them, but I can't quite get it:
I found them:
KFZW   1256C      12 by 13
KFZW2 12620       12 by 14?

I was under the impression that they should be the same size? Did I do something wrong? Maybe a line in KFZW2 is 1 to much?
Thanks in advance.

On another note, I came up with:

KFZWOP       1198A;  Y axis 134DE; X axis 16478
KFZWOP2     11A3A; "same                               "
I'm pretty sure the x axis is right, but am unsure as of the y axis. Thanks.

For KFZWOP, KFZWOP2 you are right about the axes
(unless the fact I normally define X and Y swapped compared to your view).

KFZW at 12548
KFZW2 at 12608
Both are 16x12 (nmot_w x rl_w), axes at 13500 (nmot_W) and 13564 (rl_w)


I wasn't going to ask, but seeing how it wouldn't hurt: How come in the ori.bin in kfzw at the end of the map the value are listed 255, 254 quite a bit. I have not seen this in other files? 8 bit/decimal view of course. This doesn't make sense unless for some reason it doesn't get used and just easier to FF everything in that area? Hope that makes sense.
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
setzi62
Full Member
***

Karma: +142/-0
Offline Offline

Posts: 249


« Reply #5 on: September 19, 2011, 12:57:04 AM »

I wasn't going to ask, but seeing how it wouldn't hurt: How come in the ori.bin in kfzw at the end of the map the value are listed 255, 254 quite a bit. I have not seen this in other files? 8 bit/decimal view of course. This doesn't make sense unless for some reason it doesn't get used and just easier to FF everything in that area? Hope that makes sense.

Hm, I don't see strange values in KFZW/KFZW2 within the CH image when using the
addresses I posted, see the attached TP output.
Logged
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #6 on: September 19, 2011, 06:56:35 PM »

I don't know how to do screen shots, but I can sure as hell take pictures Grin
Maybe I'm wrong about an offset or something? Everything from what you have is dead on except for where it pulls timing/advances. I had this question awhile ago, maybe you can fill me in. Thanks.
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #7 on: September 19, 2011, 07:04:06 PM »

And here it is in 2D; Thanks for taking a look. This has been bothering me in the back of my mind for quite some time, although I didn't feel it mattered much as I don't think I would need to change anything in those areas anyway. This was all taken from KFZW, and KFZWOP looks good to me. I thought maybe it was just my bin, but I read out a chipped bin from another CH box, it looks identical?
« Last Edit: September 19, 2011, 07:44:36 PM by rob.mwpropane » Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
setzi62
Full Member
***

Karma: +142/-0
Offline Offline

Posts: 249


« Reply #8 on: September 23, 2011, 08:06:14 AM »

Now I understand what you mean.
You have selected the correct address for KFZW and the contents are fine.
And values like 0xFF or 0xFE are also absolutely fine in this map.
You just forgot that the map values are SIGNED bytes, so 0xFF is -1 and
represents -0.75 degrees (not 255 * 0.75 = 191.250 degrees).
Logged
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #9 on: September 23, 2011, 08:24:31 AM »

Now I understand what you mean.
You have selected the correct address for KFZW and the contents are fine.
And values like 0xFF or 0xFE are also absolutely fine in this map.
You just forgot that the map values are SIGNED bytes, so 0xFF is -1 and
represents -0.75 degrees (not 255 * 0.75 = 191.250 degrees).

Sooo, maybe dumb question but how do I get it to view -0.75 etc.? I honestly thought I was losing my mind. Thank you for your response.
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #10 on: September 23, 2011, 10:43:03 AM »

Mark it as signed.

Also, taking pictures of your screen is rather silly. Why not use a screenshot?
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #11 on: September 23, 2011, 11:21:26 AM »

I'm not sure how to do a screen shot, and to be honest I've spent so much time reading the wiki and trying to decipher the funktionsrahmen, I haven't cared to research screen shots. It is silly though compared to screen shots lol. Not very professional, but it made the point. And yes as soon as I walked in the door from work I signed it, and it fixed right up. Thanks guys. I'll figure out screen shots before I post another picture...promise.
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
Rick
Hero Member
*****

Karma: +62/-4
Offline Offline

Posts: 704


« Reply #12 on: September 25, 2011, 06:55:32 AM »

screenshot - press prnt scrn button, top right of your keyboard.  Then open a program llike paint or word, and press ctrl+v

Rick
Logged
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #13 on: September 25, 2011, 07:28:22 AM »

screenshot - press prnt scrn button, top right of your keyboard.  Then open a program llike paint or word, and press ctrl+v

Rick

Awesome, thank you.
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
phila_dot
Hero Member
*****

Karma: +170/-11
Offline Offline

Posts: 1709


« Reply #14 on: September 25, 2011, 09:08:06 AM »

ctrl + alt + prnt scrn will copy just the active window.
Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 16 queries. (Pretty URLs adds 0s, 0q)