Pages: 1 2 3 [4]
Author Topic: Me7.1.1 Immo problem  (Read 33459 times)
N1CKY
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 31


« Reply #45 on: September 25, 2014, 02:26:06 AM »

Could the differences between the two files be causing the car not to start?
Logged
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173


« Reply #46 on: October 02, 2014, 07:24:13 AM »

Could the differences between the two files be causing the car not to start?

sometimes the ecu tunes are locked to the original immo .bin   which would cause a no start situation with no faults. 

i use a 8 pin soic clip and gq-4x programmer to flash all immo eproms with out desolder or boot mode.
Logged
N1CKY
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 31


« Reply #47 on: October 21, 2014, 06:25:39 AM »

Just to let everyone know i got the car started and running fine! Massive thanks to DDlillenger for providing me with a donor immo file to work with! Also thanks to everyone else who contributed and helped me out. You have no idea how much i appreciate it.

Regards,
Nicky

Logged
turboat
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619


« Reply #48 on: October 21, 2014, 09:33:10 AM »

How did you get it going in the end? Any chance I can have copies of the bin you used?
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303


« Reply #49 on: October 21, 2014, 10:41:45 AM »

Daz posted this in the eeprom section for everyone all ready. Gotta use your peepers... Smiley

http://nefariousmotorsports.com/forum/index.php?topic=3317.0title=
Logged
turboat
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619


« Reply #50 on: October 21, 2014, 11:25:33 AM »

It worked with an allroad bin on a r32? How did you solve the issues you were having reading/writing it?
Logged
N1CKY
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 31


« Reply #51 on: October 28, 2014, 03:40:45 AM »

A local guy to me had an eeprom programmer, So i whipped the eeprom off and gave him the chip and file. Find it attatched.
Logged
Pages: 1 2 3 [4]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)