Pages: 1 2 [3]
Author Topic: Fueling questions  (Read 21862 times)
Divune
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 43


« Reply #30 on: October 30, 2014, 12:09:58 PM »

Hopefully this is helpful. Currently have LDR set to a calculated ~18psi. Requested boost seems jumpy as well. I have attatched the  2 .csvs with a few 3rd gear pulls also.
Logged
Divune
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 43


« Reply #31 on: October 30, 2014, 12:10:57 PM »

And a a big thanks as always to those that help, The car on e85 currently feels amazing, can't wait to sort the boost out and get it really moving !
Logged
Divune
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 43


« Reply #32 on: November 06, 2014, 01:18:23 PM »

bump
Logged
Divune
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 43


« Reply #33 on: November 30, 2014, 12:58:04 AM »

Any ideas on this latest log? The car seems to occasionally make more than 14psi, but the actual load still does not meet my requested load. I changed KFLHBDN to the rs4 values as well.






Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #34 on: November 30, 2014, 01:09:58 AM »

but the actual load still does not meet my requested load. I changed KFLHBDN to the rs4 values as well.

The PID works based on boost, not load. There is no load feedback control loop.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Divune
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 43


« Reply #35 on: November 30, 2014, 02:13:06 AM »

could kfldimx be limiting me here?
Logged
Pages: 1 2 [3]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)