NefMoto > Technical > Tuning > FKKVS modifying.
Pages: 1 2 3 [4]
« previous next »
Author Topic: FKKVS modifying.  (Read 41107 times)
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556
« Reply #45 on: November 03, 2014, 12:33:51 PM »
Quote from: ddillenger on November 03, 2014, 05:58:23 AM
NOLRA=7 disables adaptations. It doesn't disable anything else.


NOLRA =7? Disable all ltft and stft adaptations to tune fueling perfect?
Does this apply on 551K box as well?
Logged
guitar24t
Full Member
***

Karma: +13/-0
Offline Offline

Posts: 101
« Reply #46 on: November 12, 2014, 12:02:28 AM »
Glad to hear somebody is using it besides me. Nice to know the work didn't go to waste.

For what it's worth, I seem to have the best results with smoothing passes set to 4 and smoothing factor set to about 85%. There is another new version I just published.

And for the record, the correct variable to log for pulse width is tevfakge_w. You want the exact input variables for FKKVS axes to be as accurate as possible.

Quote from: aef on November 03, 2014, 07:10:49 AM
just for clarification

i was using this with guitars fkkvs fixxer
TimeStamp, fr_w      , nmot_w    , te_w     
  sec.ms , -         , rpm       , ms       
"TIME","LambdaControl","EngineSpeed","EffInjectionTime"

masterj's me7 wizards requires
frm_w, nmot and ti_b1
Logged
aef
Hero Member
*****

Karma: +70/-46
Offline Offline

Posts: 1601
« Reply #47 on: November 12, 2014, 12:50:19 AM »
I used the values which you provide with your example log file on bitbucket.
There is no tevfakge_w

Can you please reupload the screenshots to your companys page?

can you make the smoothing factor visual as %number? that would be a great improvenment.

great tool btw  Grin
« Last Edit: November 12, 2014, 12:54:21 AM by aef » Logged
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709
« Reply #48 on: November 12, 2014, 05:20:58 AM »
Quote from: guitar24t on November 12, 2014, 12:02:28 AM
Glad to hear somebody is using it besides me. Nice to know the work didn't go to waste.

For what it's worth, I seem to have the best results with smoothing passes set to 4 and smoothing factor set to about 85%. There is another new version I just published.

And for the record, the correct variable to log for pulse width is tevfakge_w. You want the exact input variables for FKKVS axes to be as accurate as possible.


I was being lazy and general when I said te and being smart after that.

tevfakge and tevfa are literally the same, so either will work perfectly.
Logged
aef
Hero Member
*****

Karma: +70/-46
Offline Offline

Posts: 1601
« Reply #49 on: November 27, 2014, 10:06:10 AM »
Trying to dial my ev14's in with guitars fixer.

here are before and after logs and the file i used to modify my fkkvs map.

what am i missing?  Undecided
Logged
aef
Hero Member
*****

Karma: +70/-46
Offline Offline

Posts: 1601
« Reply #50 on: November 27, 2014, 10:13:29 AM »
here is the fkkvs table afterwards
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #51 on: November 27, 2014, 10:46:51 AM »
Did you set NOLRA=7?
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
aef
Hero Member
*****

Karma: +70/-46
Offline Offline

Posts: 1601
« Reply #52 on: November 27, 2014, 11:56:17 PM »
No because i did this with nolra=7 weeks ago and this was the result:
http://nefariousmotorsports.com/forum/index.php?topic=6772.msg66386#msg66386

Right now i was under the impression that fr_w will do nothing with nolra=7

But if i use fr_w to use guitars fixer nolra should be stock...
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #53 on: November 28, 2014, 12:00:35 AM »
Additionally log STFT. I do not think that FKKVS will help you here... You see initial jump of fr correction right? Try to log full pulls in different gears. If the initial jump is not in the same rpm range then I think you might have air miscalculation (leak, maf, map)
Logged
ME7Tuner Wizard
aef
Hero Member
*****

Karma: +70/-46
Offline Offline

Posts: 1601
« Reply #54 on: November 28, 2014, 01:12:16 AM »
Quote from: masterj on November 28, 2014, 12:00:35 AM
Additionally log STFT.

STFS = fr_w = LambdaControl in my Chart
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #55 on: November 28, 2014, 03:49:55 AM »
Quote from: aef on November 28, 2014, 01:12:16 AM
STFS = fr_w = LambdaControl in my Chart

No, in GK fr_w !== STFT
Logged
ME7Tuner Wizard
aef
Hero Member
*****

Karma: +70/-46
Offline Offline

Posts: 1601
« Reply #56 on: November 28, 2014, 04:42:23 AM »
 Shocked What variable do you want me to log?

im out ouf knowledge once more  Cry
« Last Edit: November 28, 2014, 04:51:58 AM by aef » Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #57 on: November 28, 2014, 05:00:06 AM »
Quote from: aef on November 28, 2014, 04:42:23 AM
Shocked What variable do you want me to log?

im out ouf knowledge once more  Cry



When I'm back home I'll write you the variables for both LTFT and STFT. Basically (x * LTFT + STFT) * fr_w (that is without other variables such as evap, wall wetting...)
Logged
ME7Tuner Wizard
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709
« Reply #58 on: November 28, 2014, 09:10:10 AM »
fr_w is short term fuel trim.

rka_w and fra_w are adapted trims.
Logged
Pages: 1 2 3 [4]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 02:56:45 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)