funnix
Full Member
Karma: +1/-0
 Offline
Posts: 76
1.8t AUM
|
 |
« on: September 09, 2014, 05:46:10 AM »
|
|
|
Hallo,
can someone correct my checksum, please?
|
|
|
|
|
Logged
|
|
|
|
|
_nameless
|
|
« Reply #1 on: September 11, 2014, 06:24:40 PM »
|
|
|
has a no read tag... im not going to scroll threw the hex to find it... post version or remove no read yourself
|
|
|
|
|
Logged
|
Giving your mom a tuneup
|
|
|
funnix
Full Member
Karma: +1/-0
Offline
Posts: 76
1.8t AUM
|
|
« Reply #2 on: September 11, 2014, 10:05:18 PM »
|
|
|
Hi Marty,
sorry i've removed the NOREAD flag.
Thank You!
|
|
|
|
|
Logged
|
|
|
|
|
k0mpresd
|
|
« Reply #3 on: September 11, 2014, 10:34:27 PM »
|
|
|
corrected with noread tag.
|
|
|
|
|
Logged
|
|
|
|
funnix
Full Member
Karma: +1/-0
Offline
Posts: 76
1.8t AUM
|
|
« Reply #4 on: September 11, 2014, 11:34:23 PM »
|
|
|
Thank you very very much guys!!!
|
|
|
|
|
Logged
|
|
|
|
funnix
Full Member
Karma: +1/-0
Offline
Posts: 76
1.8t AUM
|
|
« Reply #5 on: September 30, 2014, 10:34:02 PM »
|
|
|
Hello,
i have to gorget to delete the rear O2 Sensor!
So i correct this:
10/01/2014 07:02:53 Scalar: CDHSH changed from 1.00 (0x01) to 0.00 (0x00).
10/01/2014 07:03:00 Scalar: CDHSHE changed from 1.00 (0x01) to 0.00 (0x00).
10/01/2014 07:03:27 Scalar: CDLASH changed from 1.00 (0x01) to 0.00 (0x00).
10/01/2014 07:03:48 Scalar: CDLSH changed from 1.00 (0x01) to 0.00 (0x00).
10/01/2014 07:16:32 Scalar: CLRSHK changed from 16.00 (0x10) to 0.00 (0x00).
10/01/2014 07:18:32 Scalar: CLRSKA changed from 1.00 (0x01) to 0.00 (0x00).
Is that enought?
Can someone correct the checksums again, please?
|
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #6 on: September 30, 2014, 11:05:19 PM »
|
|
|
ME7Sum v0.1.0 or later *may* work on this bin, but no guarantees!
I would appreciate you testing it, but you should have a backup ecu (in case the car doesn't start after a few weeks) or way to bootmode the image just in case...
It is a risk, so I can understand if you don't want to gamble.
|
|
|
|
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
hopsis
Full Member
Karma: +13/-4
Offline
Posts: 174
|
|
« Reply #7 on: September 30, 2014, 11:37:35 PM »
|
|
|
I tried with the latest ME7Sum. C:\Users\Käyttäjä\Desktop\tunettamiset\Me7sum\temp>me7sum kopio.bin corrected_me
7sum.bin
ME7Tool (v0.1.0) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].
Attempting to open firmware file 'kopio.bin'
Step #1: Reading ROMSYS ..
Startup section: word[0x00008000]+word[0x0000FFFE]
@8038 Add=0x00010033 CalcAdd=0x00010033 ADD OK
Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0xFFFFF
@803c Add=0x009E95DA CalcAdd=0x009E95DA ADD OK
All param page: word[0x00010000]+word[0x0001FFFE]
@1bf06 Add=0x971D CalcAdd=0x971D ADD OK
Step #2: Reading RSA signatures ..
Searching for RSA offset #0...OK
Searching for RSA offset #1...OK
Signature: @8ff60-8ffe0
Modulus: @1696a-169ea
Exponent: @169ea = 3
Searching for MD5 ranges...OK
MD5 Block Offset Table @16946 [32 bytes]:
1) Adr: 0x00010002-0x00013FFE
2) Adr: 0x00014252-0x00017F4E
3) Adr: 0x00018192-0x0001FBDC
4) Adr: 0x00026A00-0x0002FFFC
EncrMD5: 87 0b e6 11 25 50 7a 53 c0 a3 8d 64 c4 b7 79 15
CalcMD5: 2c 64 16 fe 6e 45 bf ea 80 dd 8b 4c 56 7d 93 e4
1) Adr: 0x00010002-0x00013FFE
2) Adr: 0x00014252-0x00017F4E
3) Adr: 0x00018192-0x0001FBDC
4) Adr: 0x00026A00-0x0002FFFC
** FIXED **
Step #3: Reading Main Data Checksums ..
Searching for main data CRC pre block...missing
Searching for main data CRC/csum blocks...OK
Searching for main data CRC offsets...missing
Searching for main data checksum offsets...OK
1) Adr: 0x010002-0x013FFE CalcCSM: 00135BB4
2) Adr: 0x014252-0x017F4E CalcCSM: 0026854D
3) Adr: 0x018192-0x01FBDC CalcCSM: 0044F30D
4) Adr: 0x026A00-0x02FFFC CalcCSM: 00C172EA
@8ffe0 CSM: 00C1730E CalcCSM: 00C172EA ** FIXED **
Step #4: Reading Main Program Checksums ..
Searching for main program checksum..OK
ROM Checksum Block Offset Table @27af6 [16 bytes]:
1) Adr: 0x000000-0x00FBFF
0x00FC00-0x01FFFF SKIPPED CalcChk: 0x21960ADE CalcChk: 0xDB12302A
2) Adr: 0x020000-0x0FFFFF
@fffe0 Chksum: 0x2F0D2278 CalcChk: 0x2F183218 ** FIXED **
Step #5: Reading Multipoint Checksum Blocks ..
Searching for multipoint block descriptor #1...missing
Searching for multipoint block descriptor #2...OK
1) <1fbde> Adr: 0x000000-0x003FFF Chk: 0x0FA0F5CF Boot: (whitelisted) OK
2) <1fbee> Adr: 0x004000-0x007FFF Chk: 0x0F4716B3 Boot: (whitelisted) OK
3) <1fbfe> Adr: 0x000000-0x003FFF Chk: 0x0FA0F5CF CalcChk: 0x0FA0F5CF OK
4) <1fc0e> Adr: 0x004000-0x007FFF Chk: 0x0F4716B3 CalcChk: 0x0F4716B3 OK
Multipoint #2: [66 blocks x <16> = 1056 bytes]
*** Found 70 checksums in kopio.bin
Attempting to output corrected firmware file 'corrected_me7sum.bin'
Ý Opening 'corrected_me7sum.bin' file for writing
Ý Writing to file
Ý Validating size correct 1048576=1048576
Ý All OK, closing file
*** DONE! 7/7 error(s) corrected in kopio.bin! ***
C:\Users\Käyttäjä\Desktop\tunettamiset\Me7sum\temp>me7check corrected_me7sum.bin
==============================================================================
me7check v1.12 (c) mki, 06/2004-05/2012
Checking file corrected_me7sum.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 40/1/ME7.5/5/4013.03//24C/Dst03o/021003//
-> Contents of ECUID data table:
- '0261207420' (SSECUHN)
- '1037369397' (SSECUSN)
- '8N0906018AP ' (VAG part number)
- '0003' (VAG sw number)
- '1.8L R4/5VT ' (engine id)
-> Contents of ECUID data table:
- 'HW_MAN004'
RSA signature failure found
-> Found 1 error!!! ******************************* I'm at work now and won't be at my Winols computer until tomorrow but here's the ME7Sum output file if You feel like a guinea pig. |
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #8 on: September 30, 2014, 11:53:19 PM »
|
|
|
Yep. I still don't know why ME7Check doesn't like my RSA corrections  |
|
|
|
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
|
ddillenger
|
|
« Reply #9 on: October 01, 2014, 12:15:27 AM »
|
|
|
Yep. I still don't know why ME7Check doesn't like my RSA corrections I heard Becky telling Stacy that ME7Check called your RSA corrections doody heads. |
|
|
|
|
Logged
|
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!
Email/Google chat:
DDillenger84(at)gmail(dot)com
Email>PM
|
|
|
funnix
Full Member
Karma: +1/-0
Offline
Posts: 76
1.8t AUM
|
|
« Reply #10 on: October 01, 2014, 01:51:06 AM »
|
|
|
I need my car every day and have a Galetto Cable, but i won't to flash the me7sum files! Otherwise i wouldn't ask for a checksumcorrection here.
|
|
|
|
« Last Edit: October 01, 2014, 02:59:10 AM by funnix »
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #11 on: October 02, 2014, 09:54:43 AM »
|
|
|
Yep. I still don't know why ME7Check doesn't like my RSA corrections Problem fixed as of v0.1.1 |
|
|
|
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
funnix
Full Member
Karma: +1/-0
Offline
Posts: 76
1.8t AUM
|
|
« Reply #12 on: October 02, 2014, 10:42:16 AM »
|
|
|
Awesom! Thank you!
|
|
|
|
|
Logged
|
|
|
|
|
