Have You tried with another ecu? One that You know for sure is working. Over the years I've had three or four cheap ebay cables just stop working with no apparent reason. (Well tbh once I jammed the 2x2 connector in my UrS6 the wrong way and that killed one cable.)

I have had an issue using galletto not doing boot mode read/write on my newer laptop. It will read and write via kwp but not boot. Using my older 32 bit laptop allowed me to use boot mode.

I never managed to get galletto working on my 64bit laptop, seems to work ok on my 32bit one. What you get for buying crappy clone tools. Does mpps work on 64bit windows?

Yeah my laptop is xp so im not worried about that, im going to look for a new laptop soon tho. I have spend so long trying weird different things, im close to throwing in the towel. I need my car. Its been sitting way to long. Ima try one last time with a new pc and power supply if it doesnt work then there isnt much i can do.

The plugin guy for tunerpro still has not emailed me back...... So i cant even make legit changes yet.

I did get nef to work and recognize the cable again. It is extremely finicky. Nef red the serial to be 12345678 so i am coding it correctly. It is just very finicky. I have to unplug and re-install drivers about 5 times to get it to connect once and after i attempt to boot mode connect it fails of course and then if i try it again it doesnt recognize the device. It seems to not care if the cable has power or not. I might try and get yet another cable.....

I got a new power supply does 13.8v output. No luck all i get is Boot mode inactive and i know its lying to me. I have tried for like a week now with different drivers. Im positive the serial on my cable matches galleto. My car has not run for a month now. I really need some help. I have tried this on xp 32bit and windows 7 64bit. Several different computers. Everytime boot mode inactive. Some say i should get mpps.

Thanks! Getting error

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\ABC>cd desktop

C:\Documents and Settings\ABC\Desktop>me7_95040 --h
ME7_95040 v1.02
Allows to program ME7 ECU's EEPROM (95040) in boot mode.
This software needs a dumb serial to k-line cable for connection with the ecu.

Usage: me7_95040 [OPTIONS]... [FILE]...
 -p, --comport COMPORT     Set COMPORT.
 -b, --baudrate BAUDRATE   Set BAUDRATE, default: 57600.
                           Allowed baud rates: 9600, 10400, 19200, 57600.
 -r, --read                Save EEPROM contents to file.
 -w, --write               Write file to EEPROM.
 -s, --screen              Print EEPROM contents to screen.
     --help                Display this help and exit.

Usage example:
   Print EEPROM contents to srcreen:   $ me7_95040 --comport 1 --screen
   Save EEPROM contents to file:       $ me7_95040 -r -p 1 95040.bin
   Write file to EEPROM at 10400 bps:  $ me7_95040 -w -b 10400 -p1 95040.bin

It's free for hobby use.
This software is provided "as is", with NO WARRANTY.
email: agv.tuning@gmail.com

C:\Documents and Settings\ABC\Desktop>me7_95040 --comport 1 --screen
Opening COM1 ... OK
Starting Boot_mode ... FAIL. (error=0x09)
Closing COM1

I guess she doesnt want to go into boot mode. i tried giving pin 21 12v as well to no avail. tried shorting pin 24 and keeping the pads shorted. I wonder if my ecu is broke.