Pages: [1]
Author Topic: ME7.5 spare ecu  (Read 9225 times)
KmosK04
Full Member
***

Karma: +5/-10
Offline Offline

Posts: 97


« on: September 14, 2014, 08:02:58 AM »

Hello guys. I have a 1.8t AUQ with 06A906032MJ ME7.5 ecu. I want to buy a spare ecu to test my files. I have to look for MJ only or I can use another one? What I have to do with the immo to be plug n play? I read too many topics and I'm so confused...
Logged
turboat
Moderator
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619


« Reply #1 on: September 14, 2014, 11:37:11 AM »

Some ECUs are cross flashable - meaning you can use the flash from another ECU on them, e.g. people use the 551M flash on most other 2.7T ecus.

There is not an easy way to figure out what you can and cant cross flash, other than a lot of reading on here. For starters, 512kb and 1024kb ECUs are definitely not cross flashable, the different versions of motronic (7.1, 7.1.1, 7.5) are not cross flashable.

You probably want to look at other AUQ ecus, such as an 032HN, if you cannot find one then look at other 1.8t ECUs - there are a lot of threads about compatibility where people have cross flashed stuff.

See here:
http://nefariousmotorsports.com/forum/index.php?action=printpage;topic=2031.0
etc

My AUQ is using an ECU from a 2001 A6 1.8T (4B0906018DC) with no issues.
Logged
KmosK04
Full Member
***

Karma: +5/-10
Offline Offline

Posts: 97


« Reply #2 on: September 14, 2014, 04:08:12 PM »

Thanks turboat I'll search for mj and hn to be sure. The next step is to clone or delete immo right?
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #3 on: September 14, 2014, 04:14:59 PM »

MJ and HN can be crossflashed Smiley
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
KmosK04
Full Member
***

Karma: +5/-10
Offline Offline

Posts: 97


« Reply #4 on: September 14, 2014, 04:19:37 PM »

What does this mean? I just have to flash my file and it's plug n play? What about the immo?
Logged
316LV
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 150


« Reply #5 on: September 14, 2014, 06:40:25 PM »

I believe what the man is saying is they are compatible from a hardware standpoint. Most likely VAG100. Here is a list of those ECUs from an old post on this site:

VAG100
VW Golf,Jetta NA MY2002 1.8T 06A906032HS S0006
VW Golf,Jetta NA MY2002 6-spd 1.8T 06A906032ML S0001
VW Golf,Bora EURO MY2002 1.8T 06A906032HJ S0002
VW Golf,Bora EURO MY2003 1.8T 06A906032KP S0203
VW Golf,Bora EURO MY2001 1.8T 06A906032EN S0002
VW Golf,Jetta NA MY2002 Auto 1.8T 180hp 06A906032HF S0005
Audi A3, Seat Leon Cupra EURO MY2002 1.8T 180hp 06A906032HN S0001
Audi A3, Seat Leon Cupra EURO MY2002 1.8T 06A906032HK S0002
Audi A3, Seat Leon Cupra EURO MY2003 1.8T 06A906032HR S0001
Audi A3, Seat Leon Cupra EURO MY2002 1.8T 06A906032HP S0001
Audi TT NA MY2002 1.8T 180HP 8N0906018AL S0004
Audi TT EURO MY2001 1.8T 180hp 8N0906018AQ S0001
Audi TT EURO MY2002 1.8T 180HP 8N0906018AM S0001
Audi TT EURO MY2003 1.8T 180HP 8N0906018AP S0001

If the Big D says that your MJ should work with the HN, then these should too. I have no direct experience other than by crossflashing HS and HN (edit: And HJ, forgot that). No issues there.

And no it is not plug and play. You will have to flash your .bin and eeprom to the new box. The eeprom is what contains your immo data.

I did what you are proposing. I found an Ebay ECU and then flashed a copy of my ori bin and eeprom to it. Put it in the car and no problems, immo or otherwise. I've been tuning on it exclusively. My original is sitting safe on my bookshelf... For the day I really screw up this one.
« Last Edit: September 14, 2014, 06:43:26 PM by 316LV » Logged

Go ahead and give me negative karma... I don't care if you like what I post princess.
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #6 on: September 14, 2014, 10:45:56 PM »

To check if a file will brick an ecu, you can do 1 of 2 things.

1. Compare the bootrom with a hex editor. The beginning of the files should be the same.
2. Compare the bootron with me7check. They MUST be the same versions.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
KmosK04
Full Member
***

Karma: +5/-10
Offline Offline

Posts: 97


« Reply #7 on: September 14, 2014, 11:19:06 PM »

Thanks a lot both of you!!!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 16 queries. (Pretty URLs adds 0s, 0q)