Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Tuning
>
Krkte + TVUB
Pages: [
1
]
« previous
next »
Author
Topic: Krkte + TVUB (Read 5386 times)
brembo
Jr. Member
Karma: +0/-0
Offline
Posts: 48
Krkte + TVUB
« on: September 24, 2014, 07:18:57 AM »
Hello ,
i have Golf5 ,where I'm not sure with the TVUB!
This Car have Siemens 750cm³ @ 3bar ,the have 4bar (866cm³)
Krkte = 1AA6EE (new 0,0451)
TVUB =1AA70C (
)
KVB = 1A3FD7 (is 8 bits and only goes up 776cm³ ??)
Can I as a fast Help please?
Lg.
Logged
brembo
Jr. Member
Karma: +0/-0
Offline
Posts: 48
Re: Krkte + TVUB
« Reply #1 on: September 24, 2014, 07:29:19 AM »
old TVUB =
Volt
6.00 = 3.3952
8.00 = 1.9296
10.0= 1.3024
12.0 = 0.7136
16.0 = 0.5600
Am not familiar with the data sheet,if I take 750cm³ a standard begins the first of at 8Volt!!
Logged
Lost
Hero Member
Karma: +21/-14
Offline
Posts: 556
Re: Krkte + TVUB
« Reply #2 on: September 24, 2014, 10:51:37 AM »
FKVA is constant conversion for consumption dispaly.
ie
your old injectors were 400cc at 4 bar
new ones 850 at 4 bar
You set KVB at 425 and FKVA at 2.
There you have right fuel consumption displayed.
Logged
brembo
Jr. Member
Karma: +0/-0
Offline
Posts: 48
Re: Krkte + TVUB
« Reply #3 on: September 24, 2014, 11:46:54 AM »
I have installed the nozzles only yesterday,
now I would like to customize the clean.Unfortunately I'm not clear with the KVUB.
Hope for your help
Lg.
Logged
carsey
Sr. Member
Karma: +7/-4
Offline
Posts: 401
Re: Krkte + TVUB
« Reply #4 on: September 24, 2014, 06:45:42 PM »
you will need the correct TVUB for your injectors.
KRKTE can be worked out using the formula in the FR PDF file.
Get trims somewhere near with KRKTE and TVUB and FKKVS set to one across the whole map, then have a good drive around for 30mins or so with me7logger attached logging the 3 variables for FKKVS fixer tool and then run data through tool.
Done the above method on my bosch 600cc injectors and fuel trims are within +/- 3%.
Logged
brembo
Jr. Member
Karma: +0/-0
Offline
Posts: 48
Re: Krkte + TVUB
« Reply #5 on: October 01, 2014, 09:06:15 AM »
Hello,
Who can with the nozzle with TVUB Help ?
when I go to Lambda 0.72 from gas :-(
Would like to adjust properly, but I see the data sheet does not.
Lg.
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 30, 2024, 12:58:58 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
