Pages: [1]
Author Topic: KFLDHBN  (Read 4782 times)
turdburglar44
Full Member
***

Karma: +5/-1
Offline Offline

Posts: 110



« on: September 26, 2014, 06:14:10 PM »

What are the column units/conversions for kfldhbn?
Logged

Tuning is the easy part...
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #1 on: September 26, 2014, 07:28:03 PM »

Check xdf.

RPM, tmot.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
!nfern0
Full Member
***

Karma: +10/-1
Offline Offline

Posts: 91

Audi TT 1.8T BAM


« Reply #2 on: October 26, 2014, 09:46:44 AM »

Check xdf.

RPM, tmot.

its not tmot.

its tumc if there is an ambient temperature sensor and CWRLMX = 1.
If there is no ambient temperature sensor or CWRLMX = 0 then it is tans.
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #3 on: October 26, 2014, 09:49:35 AM »

Thanks for the correction!
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709


« Reply #4 on: October 26, 2014, 10:08:21 AM »

As above, it's tans in our case
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)