Pages: [1]
Author Topic: Multitronic 01j TCM Flashing or Reflashing  (Read 7450 times)
kanaan
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« on: October 04, 2014, 09:58:00 AM »

Hi

is there  any solution to read the software of the multitronic 01j transmition TCM .
any information will be thansfull
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303


« Reply #1 on: October 05, 2014, 07:00:28 AM »

I have never tried but I'm sure you can remove the chip and read/write externally.
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 654


« Reply #2 on: October 05, 2014, 10:06:34 AM »

I'm sure you can remove the chip and read/write externally.

You sure...  Grin
Do you ever seen ceramic hybrid borard using in 01J control module ?
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #3 on: October 05, 2014, 12:32:50 PM »

Like ABS module and Haldex.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
kanaan
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #4 on: October 05, 2014, 12:50:52 PM »

it has 1 k line
can bus
but the cpu still not known.
eeprom ??
I tried with galleto , kwp2000 plus , vcp and nothing
Logged
kanaan
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #5 on: October 07, 2014, 02:29:45 AM »

where are the programers ? any Ideas ?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 17 queries. (Pretty URLs adds 0s, 0q)