Pages: [1]
Author Topic: Very weird ps_w values  (Read 4697 times)
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« on: October 04, 2014, 01:48:56 PM »

Hi, guys!
Need your help on this very weird issue. Most of the time I use ECUxPLOT to filter logs by wped = 100%, but today I've tried to check logs based on TIME and found that ps_w are extremely low while in light throttle or part throttle.

Please checkout my log and look around 75-100s. ps_w goes down to 250!

And here's log (for some reason I can not attach it).
https://www.sendspace.com/file/7i0dvs
« Last Edit: October 04, 2014, 02:16:28 PM by masterj » Logged

phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709


« Reply #1 on: October 04, 2014, 02:40:22 PM »

ps_w is modelled intake manifold pressure...
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #2 on: October 04, 2014, 02:53:11 PM »

ps_w is modelled intake manifold pressure...

oh ok Smiley Ill have to fix this then... I have moved to different file and there are a lot of sensor and other adaptations. I guess I have wrong model here...
Logged

masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #3 on: October 07, 2014, 05:17:01 AM »

One small question: is this including vacuum?

ambient pressure + boost/-vacuum ?

In other words if my ambient pressure is 1000mBar and vacuum on deceleration is -700mBar then ps_w is 300mBar, right?
Logged

phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709


« Reply #4 on: October 07, 2014, 06:03:48 AM »

This was my point, it is modelled intake manifold pressure. The intake manifold is not always pressurized and values below ambient pressure are completely normal.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)