NefMoto > Technical > Reverse Engineering > 2 step hard cut launch contol/antilag..help...
Pages: [1]
« previous next »
Author Topic: 2 step hard cut launch contol/antilag..help...  (Read 11546 times)
scoot1043
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 52
« on: October 08, 2014, 01:31:18 PM »
Hi, Right I would like to add the flame throwing epicness...

right I would like to follow this post but it says I need a different XDF.....

http://www.nefariousmotorsports.com/wiki/index.php/Adding_anti-lag_launch_control_and_no-lift_shift

Is there one available for my 1.8t AUM engine, 06A906032DR ME7.5 0003
« Last Edit: October 08, 2014, 01:37:56 PM by scoot1043 » Logged
armageddon
Sr. Member
****

Karma: +20/-3
Offline Offline

Posts: 348
« Reply #1 on: October 08, 2014, 04:02:49 PM »
use the script on this thread: http://nefariousmotorsports.com/forum/index.php?topic=3349.0

and then, if you are unhappy with the pre defined settings you can create xdf's parameters using an m-box xdf as reference and the locations that script gives to you
Logged
scoot1043
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 52
« Reply #2 on: October 08, 2014, 10:41:39 PM »
Quote from: armageddon on October 08, 2014, 04:02:49 PM
use the script on this thread: http://nefariousmotorsports.com/forum/index.php?topic=3349.0

and then, if you are unhappy with the pre defined settings you can create xdf's parameters using an m-box xdf as reference and the locations that script gives to you

Nice buddy! That shore willl make things easyer... But were can I get Me7info? can someone attach a file?
Logged
armageddon
Sr. Member
****

Karma: +20/-3
Offline Offline

Posts: 348
« Reply #3 on: October 09, 2014, 03:43:09 AM »
This may help:

http://nefariousmotorsports.com/forum/index.php?topic=1798.0
Logged
scoot1043
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 52
« Reply #4 on: October 09, 2014, 05:45:18 AM »
Quote from: armageddon on October 09, 2014, 03:43:09 AM
This may help:

http://nefariousmotorsports.com/forum/index.php?topic=1798.0
Thanks! Ok so me7info is the same as me7logger?

Logged
adam-
Hero Member
*****

Karma: +123/-33
Offline Offline

Posts: 2179
« Reply #5 on: October 09, 2014, 06:56:28 AM »
Have you searched at all man?

Mine's an AUM, has everything you'll ever want.  You really need to be looking into rods for it though, because it will throw one.  Change FTOMN to 0, disable the soft launch (I was just playing with it), and ramp up the AL launch to 4500.

Your coils will last 5 minutes and then you'll throw a rod.

Happy motoring! Smiley
Logged
scoot1043
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 52
« Reply #6 on: October 09, 2014, 10:14:50 AM »
Quote from: adam- on October 09, 2014, 06:56:28 AM
Have you searched at all man?

Mine's an AUM, has everything you'll ever want.  You really need to be looking into rods for it though, because it will throw one.  Change FTOMN to 0, disable the soft launch (I was just playing with it), and ramp up the AL launch to 4500.

Your coils will last 5 minutes and then you'll throw a rod.

Happy motoring! Smiley

Ok, well that is not so enshrining lol... so is AL/ hard cut already on the ecu? im confused....
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #7 on: October 09, 2014, 10:48:57 AM »
Quote from: scoot1043 on October 09, 2014, 05:45:18 AM
Thanks! Ok so me7info is the same as me7logger?

No. Different utility used for a completely different purpose.

Quote from: scoot1043 on October 09, 2014, 10:14:50 AM
Ok, well that is not so enshrining lol... so is AL/ hard cut already on the ecu? im confused....

Do you mean right after patching?
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
scoot1043
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 52
« Reply #8 on: October 09, 2014, 11:33:12 AM »
Quote from: nyet on October 09, 2014, 10:48:57 AM
No. Different utility used for a completely different purpose.

Do you mean right after patching?


Ok, well the thread I was following says I need Me7info....
http://nefariousmotorsports.com/forum/index.php?topic=3349.0

so wear can I get that from?

so the patch is required yhes? and then I update the XDF file....
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #9 on: October 09, 2014, 11:46:22 AM »
Sorry, I misunderstood: Yes, ME7Info comes with ME7Logger.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
armageddon
Sr. Member
****

Karma: +20/-3
Offline Offline

Posts: 348
« Reply #10 on: October 09, 2014, 01:38:36 PM »
download me7logger -> use Me7Info to creat your .ecu file -> use the script -> if not happy creat xdf to be able change data...

That thread has 12 pages, if you read them all the information you want is there
Logged
adam-
Hero Member
*****

Karma: +123/-33
Offline Offline

Posts: 2179
« Reply #11 on: October 09, 2014, 02:31:24 PM »
Go find my file..  Roll Eyes
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 22, 2024, 10:50:38 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)