bigdawg56
Newbie
Karma: +2/-0
 Offline
Posts: 10
|
 |
« on: June 11, 2011, 06:37:08 PM »
|
|
|
Can another flash be modified to work on 4Z7907551AA?
|
|
|
|
|
Logged
|
|
|
|
Tony@NefMoto
Administrator
Hero Member
Karma: +132/-4
Offline
Posts: 1389
2001.5 Audi S4 Stage 3
|
|
« Reply #1 on: September 18, 2011, 07:26:35 PM »
|
|
|
It is hard to determine which files are compatible with each ECU type. The best you can do is find files that are close in the hardware and software part numbers, and for the same engine and transmission type.
|
|
|
|
|
Logged
|
|
|
|
bigdawg56
Newbie
Karma: +2/-0
Offline
Posts: 10
|
|
« Reply #2 on: September 26, 2011, 03:12:57 PM »
|
|
|
so would a file from a 8D0907551AA which is a allroad be close enough to compare to modify with 4Z7907551AA which is a A6?
|
|
|
|
|
Logged
|
|
|
|
Tony@NefMoto
Administrator
Hero Member
Karma: +132/-4
Offline
Posts: 1389
2001.5 Audi S4 Stage 3
|
|
« Reply #3 on: September 27, 2011, 10:23:53 AM »
|
|
|
That is probably as close as you can get. The Allroad and A6 are really the same car, so the files should be compatible.
|
|
|
|
|
Logged
|
|
|
|
ejg3855
Full Member
Karma: +6/-0
Offline
Posts: 123
|
|
« Reply #4 on: September 27, 2011, 03:24:37 PM »
|
|
|
That is probably as close as you can get. The Allroad and A6 are really the same car, so the files should be compatible.
I am pondering this as well with a LP file for 1.8T 180hp VW and using it on my 1.8T 180hp Audi TT both are AWP engine codes. |
|
|
|
|
Logged
|
|
|
|
|
vwaudiguy
|
|
« Reply #5 on: September 27, 2011, 11:26:03 PM »
|
|
|
I am pondering this as well with a LP file for 1.8T 180hp VW and using it on my 1.8T 180hp Audi TT both are AWP engine codes.
I'm fairly certain you will be fine with that combo. You definitely won't hurt anything to try it. Make sure the TT has a wideband 02 sensor. Do it!  |
|
|
|
|
Logged
|
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
|
|
|
|
Gonzo
|
|
« Reply #6 on: October 02, 2011, 12:23:28 PM »
|
|
|
That is probably as close as you can get. The Allroad and A6 are really the same car, so the files should be compatible.
I am pondering this as well with a LP file for 1.8T 180hp VW and using it on my 1.8T 180hp Audi TT both are AWP engine codes. IMMO might be incompatible. Car should work but some modules may not be happy with the ECU SW. Make sure you have a back up method of flashing back that is not Nefmoto if you go this route. |
|
|
|
|
Logged
|
|
|
|
ejg3855
Full Member
Karma: +6/-0
Offline
Posts: 123
|
|
« Reply #7 on: October 05, 2011, 09:38:33 AM »
|
|
|
Make sure you have a back up method of flashing back that is not Nefmoto if you go this route.
Elaborate? |
|
|
|
|
Logged
|
|
|
|
|
Gonzo
|
|
« Reply #8 on: October 05, 2011, 10:21:32 AM »
|
|
|
Make sure you have a back up method of flashing back that is not Nefmoto if you go this route.
Elaborate? If you flash an image that is not compatible with the data you have on your EPROM IMMO-wise, you will not be able to flash your car with nefmoto nor drive it. |
|
|
|
|
Logged
|
|
|
|
NOTORIOUS VR
Administrator
Hero Member
Karma: +58/-7
Offline
Posts: 1056
|
|
« Reply #9 on: October 05, 2011, 10:39:04 AM »
|
|
|
Question... 02 AR... has IMMO... I flashed so far and H-box and M-box file on the ECU without issue using Nefmoto... is the IMMO still active?
|
|
|
|
|
Logged
|
|
|
|
|
Gonzo
|
|
« Reply #10 on: October 05, 2011, 10:46:57 AM »
|
|
|
Question... 02 AR... has IMMO... I flashed so far and H-box and M-box file on the ECU without issue using Nefmoto... is the IMMO still active?
IMMO has to do with the image you have on the ECU right now. If the image you have there does not have IMMO then your car is IMMO-less. |
|
|
|
|
Logged
|
|
|
|
NOTORIOUS VR
Administrator
Hero Member
Karma: +58/-7
Offline
Posts: 1056
|
|
« Reply #11 on: October 05, 2011, 10:48:18 AM »
|
|
|
ok thanks
|
|
|
|
|
Logged
|
|
|
|
|
Gonzo
|
|
« Reply #12 on: October 05, 2011, 10:53:23 AM »
|
|
|
ok thanks
 |
|
|
|
|
Logged
|
|
|
|
ejg3855
Full Member
Karma: +6/-0
Offline
Posts: 123
|
|
« Reply #13 on: October 05, 2011, 11:20:39 AM »
|
|
|
ok thanks
If I disable IMMO on the receiving ECU then I should be safe correct? |
|
|
|
|
Logged
|
|
|
|
std396
Newbie
Karma: +0/-0
Offline
Posts: 1
|
|
« Reply #14 on: October 13, 2011, 01:04:39 PM »
|
|
|
|
|
|
|
|
Logged
|
|
|
|
|
